Select your vehicle

King Shocks Performance Series Shock Kit – 25001-160

King Shocks

Shop Jeep Wrangler TJ Shock Absorbers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front performance shock kit for 1997–2006 Jeep Wrangler TJ, per the manufacturer fitment list
  • Designed for 0 to 2 inch lift kits, sold as a pair
  • Large diameter micro-polished shafts
  • Aeroquip high pressure hoses on remote reservoirs with 6063 aluminum alloy reservoirs

Description

Overview

The King Shocks 25001-160 is a front performance shock kit for the 1997–2006 Jeep Wrangler TJ, sold as a pair. It fits the Wrangler (TJ) in the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims. Confirm fit for your vehicle’s year, model and trim before ordering.

The kit is built for vehicles with 0 to 2 inch lift kits, which makes it a fit for a Wrangler that is lifted modestly or kept near factory height. The installation is a simple bolt-on job, and the kit uses large diameter micro-polished shafts for the front position.

Key features

  • Front position for the 1997–2006 Jeep Wrangler TJ per the manufacturer fitment list
  • Designed for vehicles with 0 to 2 inch lift kits
  • Large diameter micro-polished shafts
  • Aeroquip high pressure hoses on the remote reservoirs
  • 6063 aluminum alloy reservoirs that help dissipate heat
  • Sold as a pair

Front shock setup on a TJ

Front shocks on a Wrangler TJ control steering feel, body roll and the rebound of the axle over rough ground. A remote reservoir can help the damping stay steady during long trail runs, since the oil has more room to cool. Shaft finish matters too, because the seal sees the most dirt and grit at the front.

Set the lift height first, then choose the kit to match. Check hoses, reservoir brackets and the bolts at the top and bottom mounts after each few trail runs. Keep the shaft clean and inspect the seal for weeping, since early seal wear often shows up as oil on the body.

  • Match the kit to your lift height
  • Clean shafts after mud runs
  • Check hose routing

Specifications

Brand King Shocks
Part number 25001-160
UPC 700005378271
Position Front
Shock series Performance Series
Charge type Gas charged
Lift height 0 to 2 inch lift kits
Shaft finish Large diameter, micro-polished
Hoses Aeroquip high pressure hoses on remote reservoirs
Reservoir material 6063 aluminum alloy
Fitment type Direct fit
Sold as Pair

Vehicle fitment

The manufacturer fitment list includes the 1997–2006 Jeep Wrangler (TJ) in the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.

The Wrangler TJ is the confirmed fit in the trims named above, and LJ fit should be checked against your vehicle’s year, model and trim before ordering.

Installation notes

This is a simple bolt-on installation. Match the kit to your lift height, since it is designed for 0 to 2 inch lift kits, and check the lift height on your Wrangler before ordering.

What’s included

A pair of front performance shock kits with remote reservoirs.

SKU: KST25001-160 Category:

Specification

Shipping weight 35.00 lbs
Package dimensions 8.00 × 0.40 × 0.20 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (TJ)1997–200665th Anniversary Edition, Rubicon, SE, Sahara, Sport, X

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the King Shocks 25001-160 fit a 2005 Jeep Wrangler LJ?

The confirmed fit is the 1997 to 2006 Jeep Wrangler TJ. For a 2005 LJ, confirm fit for your vehicle's year, model and trim before ordering, since the TJ is the confirmed model.

Is the 25001-160 for the front or the rear?

It is the front position, sold as a pair with remote reservoirs. The kit is a front-only set, so the rear position needs its own kit.

What lift height is this kit designed for?

The kit is designed for vehicles with 0 to 2 inch lift kits, which is the intended setup. Measure your current lift and confirm it falls in that range before ordering.

What is the part number?

The part number is 25001-160 from King Shocks, with UPC 700005378271. Match these numbers against the packaging when comparing it with the rear version, part number 25001-161.

Do front shocks need to be replaced in pairs on a Wrangler?

Replacing both fronts together is the better choice. Matched damping keeps steering and body control even from side to side. Check both sides for leaks and wear before ordering the replacement.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler TJ Shock Absorbers on Amazon