Overview
The Pro Comp ES3000 Series Shock Absorber 329508 is a front twin tube cellular gas shock for 1999–2016 Ford F-250 Super Duty trucks and select 1999–2016 F-350 Super Duty years, for use with a 6.5 – 8.5 in. lift. It measures 29.83 inches extended and 17.32 inches collapsed, with 12.51 inches of travel.
The ES3000 is engineered to improve driving comfort and performance on and off the road, with 10 stage velocity sensitive valving that self adjusts to road conditions. It has a 5/8 inch chrome hardened piston rod, a Teflon rebound stop and double welded shock mounts, and it carries a limited lifetime warranty from Pro Comp Suspension.
Key features
- Twin tube cellular gas design
- 10 stage velocity sensitive valving
- 5/8 inch chrome hardened piston rod with Teflon rebound stop
- Double welded shock mounts
- Loop upper and lower mounts
- White shock finish
- Not adjustable and no remote reservoir
- Pro Comp Suspension limited lifetime warranty
Choosing a shock for a lift
A lift changes how a shock works, so the right replacement depends on the new ride height as well as the truck’s model. A shock that is well matched to the lift keeps the wheel controlled through the full range of motion. Mismatched lengths can cause bottoming, binding and early mount failure, which is why careful measuring matters.
Front shocks tend to wear quickly on lifted trucks because they handle more movement and more heat. Look for fluid on the body, a bouncy ride after bumps, uneven tire wear and clunking over rough ground. Replacing shocks in matched pairs and checking the steering linkage at the same time keeps the front end predictable.
- Measure old shock lengths before ordering
- Check steering linkage for play
- Inspect mounts and bushings during removal
- Keep the front shocks matched left to right
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 329508 |
| UPC | 614901695908 |
| Product type | Shock absorber (ES3000 series) |
| Position | Front |
| Lift height | 6.5 – 8.5 in. lift |
| Extended length | 29.83 inches |
| Collapsed length | 17.32 inches |
| Travel length | 12.51 inches |
| Upper mount | Loop |
| Lower mount | Loop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1999–2016 Ford F-250 Super Duty in the Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL and XLT trims, and the Ford F-350 Super Duty for 1999–2004 and 2008–2016 in the same trims.
Confirm fit for the F-350 Super Duty from 2005 to 2007 before ordering. The part is made for the front position at the 6.5 – 8.5 in. lift only, and other Ford trucks fall outside this fit.
Installation notes
Follow the torque values for your vehicle and tighten all fasteners to them. Support the vehicle on jack stands or a lift on level ground, never on a jack alone, and re-check fastener tightness after the first miles of driving.
Suspension work changes ride height, steering geometry and brake line and driveline clearances, so professional installation is recommended, and a wheel alignment is advised afterward. Check your local regulations on vehicle lift height and equipment.
Shocks are normally replaced in pairs across an axle. Check brake lines, hoses and wiring for slack at full suspension travel before driving.
What’s included
One shock absorber, sold each.
Not included: a shock boot, and a second shock for the other side.












