Overview
The Pro Comp Suspension ES3000 326509 is a rear hydraulic shock absorber for the 2009 Dodge Ram 2500 and the 2009 Dodge Ram 3500 in Laramie, SLT, ST and SXT versions. It is rated for a 5 to 6 in. lift.
It is meant for a heavy-duty Ram that has been raised by that amount, since the rating applies to a lifted rear suspension. The twin tube cellular gas design includes 10-stage velocity-sensitive valving, a 5/8 inch chrome-hardened piston rod and a Teflon rebound stop. Double welded mounts and the Pro Comp Suspension limited lifetime warranty come with it.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Rear position, rated for a 5 to 6 in. lift
- Pro Comp Suspension limited lifetime warranty
Heavy loads and lifted rear ends
A heavy-duty Ram carries more weight at the rear, so the shocks work harder on loaded towing and rough roads. A raised rear suspension also changes shock angle and stroke. Inspect the rear shocks whenever the truck is lifted or when the load changes regularly, because worn damping can let the rear end bounce and shift.
Replace rear shocks in pairs on the same axle so damping stays even from side to side. Check the bump stops and spring hardware too, since worn stops can take load that the shock should not carry. A good inspection covers mounts, bushings and any oil on the body.
- Inspect mounts and bushings at each oil change
- Check bump stops after a lift or spring change
- Set mount fasteners to the torque in your service manual
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 326509 |
| UPC | 614901042498 |
| Shock series | ES3000 |
| Position | Rear |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Lift height rating | 5 to 6 in. lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 2009 Dodge Ram 2500 and the 2009 Dodge Ram 3500 in Laramie, SLT, ST and SXT versions.
Dodge Ram 2500 and 3500 models from other years, and the Ram 1500, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 5 to 6 in. lift rating is a wide range, so measure your truck’s rear suspension height before ordering. Confirm the lift on the truck before fitting.
What’s included
One shock absorber, part 326509.
Not included: the dust boot.











