Overview
Part number 926530 is a gas charged shock from the Pro Comp ES9000 Series, made by Pro Comp Suspension. Its twin tube body uses the same 10 stage velocity sensitive valving and 1 3/8 inch nylon banded piston head that Pro Comp uses across the ES9000 line.
The ES9000 suits buyers who carry heavy loads or drive in demanding conditions, offering a smooth highway ride and better off-road control. The double welded shock mounts are built to keep the mounting points strong over time.
Key features
- Twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts
- Gas charged, for a smooth highway ride and off road control
Matching a replacement shock
Twin tube shocks place the working piston inside a pressure tube with a separate reserve chamber, and the gas charge helps keep damping steady as the oil heats up. For a replacement, the goal is a unit that matches the old shock’s lengths and mount style while suiting the way the vehicle is driven. A heavier load or frequent rough terrain argues for a design built for repeated work.
Before installing, look at the old shock for leaks, cracked bushings or bent eyes, since those points often explain a rough ride. Clean the mounting surfaces and compare the new unit side by side with the old one before tightening the hardware.
- Compare the old and new shock side by side
- Check mount bushings and fasteners
- Look for fluid leaks and bent eyes on the old unit
- Tighten hardware to the specified values in the service manual
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 926530 |
| UPC | 614901072433 |
| Shock series | ES9000 |
| Charge | Gas charged |
| Construction | Twin tube |
| Valving | 10 stage velocity sensitive |
| Piston head | 1 3/8 inch nylon banded, full displacement |
| Mounts | Double welded |
| Extended and collapsed length | Measure the replaced shock for extended and collapsed lengths before ordering. |
Vehicle fitment
No vehicle is named for this shock. Because the ES9000 comes in many lengths, measure the shock you are replacing at both ends of its travel and match those figures to the part before ordering.
If the mounting points on your vehicle differ from the factory setup, the shock may not bolt in as expected. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One ES9000 Series shock absorber.












