Overview
The 327553 is a front ES3000 shock rated for an 8 inch lift. It is a twin tube cellular gas design and fits the 2005 to 2016 Ford F-250 Super Duty and F-350 Super Duty.
The shock uses 10-stage velocity sensitive valving and a Teflon rebound stop. Pro Comp offers its limited lifetime warranty on the ES3000.
Key features
- Front position for an 8 inch lift
- Twin tube cellular gas design
- 10-stage velocity sensitive valving
- Teflon rebound stop
- Double welded shock mounts
Living with an 8 inch lift
An 8 inch front lift raises the front axle and changes the angles of the driveline and steering linkage. Those changes can affect tire wear, steering feel and the way the front end settles under braking. After the shock is installed, the alignment should be checked, and the driveline angles should be reviewed if the lift is significant.
Front shocks on a lifted Super Duty work harder because the suspension sits at a different angle and may reach full extension sooner. The twin tube design and velocity sensitive valving help manage that load, but the bump stops, springs and sway bar links should be in good shape too. Worn ball joints and tie rod ends should be inspected before the new shock goes in, because a loose front end can mask a shock problem.
- Check the alignment after the lift is installed
- Inspect ball joints and tie rod ends
- Review bump stop condition at full compression
- Replace worn sway bar links with the shocks
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 327553 |
| Series | ES3000 |
| Position | Front |
| Lift | 8 inches |
| Length, extended, collapsed and travel | Vehicle specific |
| Upper and lower mounts | Factory |
| Adjustable | No |
The 327553 is an 8 inch front lift shock for the 2005 to 2016 Super Duty trucks, and it is a larger lift than most of the ES3000 shocks in this set. The twin tube cellular gas design and 10-stage velocity sensitive valving give the front end a controlled feel under load, and the Teflon rebound stop limits rebound at full extension. Factory upper and lower mounts are used, so the shock fits the original mounting points.
An 8 inch front lift changes the alignment and the front driveline angles, so the truck should be aligned after the shock is fitted.
Vehicle fitment
This front shock fits the 2005 to 2016 Ford F-250 Super Duty and F-350 Super Duty in the Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL and XLT trims.
The list covers the 2005 to 2016 Super Duty trucks only, not the F-150 or the 2017 and later models. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front ES3000 shock.








