Overview
The Pro Comp ZX2060 is a front Pro Runner monotube shock absorber for the 2004 to 2006 Jeep Wrangler (LJ) and the 1997 to 2006 Jeep Wrangler (TJ). It is designed for a 1.5 inch lift. It measures 21.01 inches extended with 7.44 inches of travel, and it has a stem upper mount and a loop lower mount.
The body is a gas-charged monotube, pressurized with nitrogen to resist cavitation during compression and rebound. This design sheds heat more efficiently than a twin-tube hydraulic shock. The valving is multi-stage and tuned for each application, and a boot is included. Pairing it with Pro Runner control arms is the intended setup.
The ZX2060 is sized for a 1.5 inch lift, so its 21.01 inch extended length and 7.44 inch travel are shorter than the longer-lift versions in the same Pro Runner series. A monotube body places the oil and nitrogen gas in one tube, separated by a floating piston, which keeps the oil under pressure during compression and rebound.
Key features
- Front position, direct fit
- Gas charged monotube with nitrogen pressurization
- Multi-stage valving tuned to the application
- Stem upper mount, loop lower mount
- Zinc plated, clear coated finish
Matching a shock to lift height
A shock’s extended and collapsed lengths have to match the suspension’s range of motion. A shock sized for a smaller lift reaches its limit sooner on a larger one, so the lift on the vehicle should match the shock’s design. Compare the installed length of the old shock before ordering, and keep the upper and lower mount styles in mind.
Front shocks are commonly replaced as a pair so both sides damp the same way. Check the steering components and bushings at the same time, since worn parts change how the shock loads and wears. A stem upper mount needs a bracket that accepts a stem, so confirm that before fitting.
- Compare installed length before buying
- Confirm the upper mount accepts a stem
- Check steering bushings and components
- Replace front shocks as a pair when practical
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2060 |
| UPC | 614901024630 |
| Shock series | Pro Runner |
| Position | Front |
| Lift height | Designed for a 1.5 in. lift |
| Extended length | 21.01 in |
| Collapsed length | 13.57 in |
| Travel length | 7.44 in |
| Upper mount | Stem |
| Lower mount | Loop |
| Body | Monotube, gas charged |
| Adjustable | No |
| Remote reservoir | No |
| Finish | Zinc plated, clear coated |
| Boot | Included |
Vehicle fitment
It fits the 2004 to 2006 Wrangler LJ, including Unlimited and Unlimited Rubicon, and the 1997 to 2006 Wrangler TJ, designed for a 1.5 inch lift.
The list does not cover the 2007–2018 Wrangler JK or the 2018 and newer Wrangler JL. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock uses a stem upper mount, so the upper bracket on your vehicle must accept a stem. Fitting it to a different mount style will not work without other parts.
What’s included
One front Pro Runner monotube shock with boot, sold as each.


























