Overview
The Pro Comp Suspension ES3000 325509 is a rear hydraulic shock absorber for a long run of Chevrolet and GMC trucks and Suburbans from the 1970s and 1980s. It also fits the 1987–1996 Dodge Dakota and the 1983–1988 Ford Ranger. The shock measures 25.74 in extended and 15.49 in collapsed, with 10.25 in of travel, and has loop mounts at both ends.
Chevrolet entries cover the 1973–1986 K10, K20 and K30 pickups, the 1973–1986 K10 and K20 Suburbans, and the 1987 V10, V20 and V30 trucks. GMC entries cover the 1973–1986 K15, K25, K35 and K1500 through K3500 pickups and Suburbans, and the 1987 V1500, V2500 and V3500 trucks. Because the fitment spans several model years and ride heights, check your truck’s ride height before ordering.
The shock is built as a twin tube cellular gas unit with 10-stage velocity-sensitive valving, and its 5/8 inch chrome-hardened piston rod carries a Teflon rebound stop. Double welded mounts and the Pro Comp Suspension limited lifetime warranty complete the design.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Loop upper and lower mounts
- Rear position
- Pro Comp Suspension limited lifetime warranty
Matching shocks to body style
Chevrolet and GMC K-series trucks and Suburbans were built in many cab styles, and suspension details can differ between them. Four-wheel-drive and two-wheel-drive versions may use different ride heights, so match the rear shock to the year and body of your truck before fitting. Measure the old unit’s lengths and check where the loop eyes sit on the axle.
Dakota and Ranger owners face similar questions. Compact pickups carry lighter loads than full-size trucks, but a rear shock on a truck with a bed load or a lift still works hard. When in doubt, compare the old shock’s extended and collapsed lengths before ordering a replacement, and confirm the cab and bed configuration.
- Confirm 4×4 or 2WD before ordering
- Check the rear axle mount height
- Note cab style and bed length
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 325509 |
| UPC | 614901042238 |
| Shock series | ES3000 |
| Position | Rear |
| Type | Hydraulic, twin tube cellular gas design |
| Extended length | 25.74 in |
| Collapsed length | 15.49 in |
| Travel length | 10.25 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
The 325509 fits the 1973–1986 Chevrolet K10, K20 and K30 pickups, the 1973–1986 Chevrolet K10 and K20 Suburbans, the 1987 Chevrolet V10, V20 and V30, the 1987–1988 Chevrolet V10 Suburban, the 1989–1991 Chevrolet V1500 Suburban, the 1987–1996 Dodge Dakota, the 1983–1988 Ford Ranger, the 1975–1978 and 1979–1986 GMC K15, K25, K1500, K2500 and K3500 pickups and Suburbans, the 1987 and 1987–1991 GMC V-series trucks and Suburbans, and the 1986 GMC C2500 Suburban. Chevrolet and GMC K-series trucks from 1987 onward, except the V-series above, and Dodge Dakotas from 1997 and later are not covered. Confirm your vehicle’s year, model and trim before ordering.
Chevrolet and GMC K-series trucks from 1987 onward, except the V-series listed above, and Dodge Dakotas from 1997 and later are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Many years and cab styles are on this list, so the rear shock should be matched to the year and body of your truck. Measure the shock being replaced, since the 25.74 in extended and 15.49 in collapsed lengths are for this unit.
What’s included
One shock absorber, part 325509.
Not included: the dust boot.











