Overview
The Pro Comp Suspension ES3000 324503 is a rear hydraulic shock absorber for the 1974–1975 Dodge Ramcharger (Base and SE), the 2006–2010 Hummer H3 (Alpha, Base, Championship Series and X) and the 1974–1975 Plymouth Trailduster (Base). It uses factory upper and lower mounts, and its extended, collapsed and travel lengths are vehicle specific.
It has a twin tube cellular gas design, 10-stage velocity-sensitive valving, a 5/8 inch chrome-hardened piston rod and a Teflon rebound stop. Double welded mounts are fitted, and the shock is covered by the Pro Comp Suspension limited lifetime warranty. It is rated for 0 in. of lift or drop.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- Rear position, rated for 0 in. lift or drop
- Pro Comp Suspension limited lifetime warranty
Choosing a replacement rear shock
A rear shock controls body movement over bumps and helps keep the tires in contact with the ground as the axle rises and falls. On older body-on-frame trucks and SUVs, worn shocks usually show up as a bouncy rear end, longer stops and a loose feel on washboard roads. Because a shock is a damper rather than a spring, it rarely fails with a loud noise. It tends to lose control gradually, so the change is easy to miss.
Length and mount style come first when choosing a replacement. A shock that is too long can top out at full extension, while one that is too short can bind at full droop. Rear shocks are often replaced on both sides at once so the axle damps evenly. Bushings and mounting hardware should be checked at the same time, since worn rubber changes the working angle of the shock.
- Check the mount bushings for cracks or flattening
- Inspect the piston rod for pitting or an oily film
- Replace rear shocks on both sides together
- Recheck fastener tightness after the first few drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 324503 |
| UPC | 614901041910 |
| Shock series | ES3000 |
| Position | Rear |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Lift height rating | 0 in. lift or drop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1974–1975 Dodge Ramcharger (Base and SE), the 2006–2010 Hummer H3 (Alpha, Base, Championship Series and X) and the 1974–1975 Plymouth Trailduster (Base).
Dodge Ramcharger models from 1976 and later, Hummer H3 models from 2011 and later, and the Plymouth Trailduster from 1976 and later are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rear shock is rated for 0 in. lift or drop, so confirm the ride height on your vehicle before fitting. Compare the vehicle-specific lengths with the shock being replaced.
What’s included
One shock absorber, part 324503.
Not included: the dust boot.











