Overview
The Pro Comp Pro Runner SS part ZX2017 is a nitrogen-charged shock for late-model trucks and SUVs with independent coilover strut-style front suspensions. Its height adjustable collar can raise the front up to 2.75 inches, which Pro Comp says clears 35 inch tires, or hold the factory ride height. No position or lift range is given for this part, so confirm the fit before installing.
The factory coil spring stays in place, so the collar is the only height adjustment for this part. The collar is a patent-pending 180 degree SS design. The zinc plated, clear coated body is nitrogen charged, and the ride is designed to have an off-road style.
Key features
- Height adjustable collar, up to 2.75 in.
- Clearance for 35 in. tires at the raised setting
- Factory coil spring retained
- Nitrogen charged with a zinc plated, clear coated finish
Collar setting and tire clearance
A collar that raises the front changes how the tires sit in the wheel well, so clearance should be checked with the truck fully loaded and the steering turned to both locks. The factory spring keeps the ride controlled, but the strut will be working at a different height, which can change the feel over bumps. Setting the collar in small steps and driving the truck between adjustments makes it easier to find a setting that works.
Raising the front can also change steering and brake geometry, so inspect the brake lines and CV axle boots after any height change. Check that the collar is tight and that the threads are clean and undamaged before each season of use.
- Check clearance at full steering lock
- Set the collar in small steps
- Recheck the collar after the first few drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2017 |
| UPC | 614901024166 |
| Shock series | Pro Runner SS |
| Ride height adjustment | Up to 2.75 in., or factory height |
| Tire clearance | 35 in. |
| Coil spring | Factory spring retained; new spring not included |
| Charge | Nitrogen |
| Finish | Zinc plated, clear coated |
Vehicle fitment
It is designed for late-model trucks and SUVs with independent coilover strut front suspensions. Confirm your vehicle’s year, model and trim match before ordering.
Installation notes
The factory spring is kept, and the collar sets the height, so confirm the clearance to 35 inch tires at the raised setting before fitting.
What’s included
One Pro Runner SS shock with its collar. No coil spring is included.



































