Overview
The Fox Racing Shox 985-24-048 is a rear 2.0 Shock Series direct replacement shock for the 2006–2010 Hummer H3 and 2009–2010 Hummer H3T. It is designed to bolt in where the original shock mounts, so owners can replace a worn rear damper without fabricating new brackets. Fox says each application was rigorously tested by its engineers to maximize suspension travel and performance on and off the road.
Fox builds direct replacement shocks for hundreds of applications, ranging from stock suspensions to lifted vehicles, and also offers aftermarket kit replacements. This Performance Series unit is gas charged, uses an internal reservoir and has a black and aluminum finish.
Key features
- Direct replacement design with OEM direct replacement mounting
- Gas-charged damping with an internal reservoir
- 2.0 Shock Series body with 2.0 inch body diameter
- 5/8 inch shaft diameter
- Tested by Fox engineers for travel and performance on and off the road
- Listed lift range: w/0 – 1 in. lift
- Black and aluminum finish
Gas shock care basics
Gas-charged rear shocks rely on pressurized gas to keep the damping consistent, and a unit that has lost pressure can feel soft or inconsistent over bumps. Replacement is the usual remedy when a body leaks or the ride keeps bouncing after a single compression. The shock is a wear part, so treating it as one helps keep the rear end under control on long drives.
Inspect the upper and lower bushings, the mounting hardware and the body for oil residue each time the tires are rotated. Replace bushings that feel loose or show cracks, and tighten fasteners once the truck has settled after a few miles. Rear shocks that work together keep the axle tracking straight and reduce side-to-side motion.
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-24-048 |
| UPC | 70000669764 |
| Shock series | 2.0 Shock Series |
| Position | Rear |
| Body diameter | 2.0 inch |
| Shaft size | 5/8 inch diameter |
| Finish | Black and aluminum |
| Damping | Gas charged |
| Reservoir | Internal |
| Mounting | OEM direct replacement |
| Fitment type | Direct fit |
| Lift range | w/0 – 1 in. lift |
| Travel | Application specific |
| Extended length | Application specific |
| Collapsed length | Application specific |
| Sold | Sold separately |
| Drive | 2WD and 4WD |
Vehicle fitment
This shock is a direct fit for the following vehicles:
- 2006–2010 Hummer H3 (Alpha, Base, Championship Series, X)
- 2009–2010 Hummer H3T (Alpha, Base)
Model years outside the two ranges above are not covered, and the Hummer H2 is not covered either. Match the year, model and trim before ordering.
Installation notes
This is a bolt-on direct replacement. Gas-charged shocks are pressurized, so release tension carefully and wear eye protection during removal and installation.
What’s included
This shock is sold separately. Gather any mounting hardware your installation requires before starting.







