Overview
The Pro Comp Suspension ES3000 324502 is a hydraulic shock absorber from the ES3000 Series. Its extended, collapsed and travel lengths are vehicle specific, and it uses the factory upper and lower mounts. The shock is finished in white and sold as each. Pro Comp names no vehicle for this part, so the lengths and mount points are the key checks before ordering. The dust boot is not included.
The ES3000 is a twin tube cellular gas design with 10-stage velocity-sensitive valving. It has a 5/8 inch chrome-hardened piston rod and a Teflon rebound stop, and the double welded mounts are built for strength. The shock carries a limited lifetime warranty from Pro Comp Suspension.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- White finish
- Pro Comp Suspension limited lifetime warranty
Street and trail use
Shock damping decides how quickly the suspension settles after a bump, which matters on rough gravel and on highway expansion joints alike. A shock with a firm rebound keeps the body from floating after a dip, while a softer setting keeps the ride compliant over small bumps. The factory mounts keep the geometry close to the original design, so the shock works the way the suspension was engineered to.
Off-road use puts more heat and load into the shock, which is when seals and bushings wear sooner. Clean the shock body after muddy trips so grit does not work into the rod seal. Rinse the mounts, look for seepage, and check that the bolts are still tight after the first few runs. A shock that has lost its damping often feels bouncy long before it leaks in a visible way.
- Rinse grit off the rod after mud runs
- Check the mounts for play
- Look for seepage at the rod seal
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 324502 |
| UPC | 614901695748 |
| Shock series | ES3000 |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Fit depends on the vehicle, so measure the factory mount points and vehicle-specific lengths against the shock being replaced. Check your truck’s year, model and trim first.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, part 324502.
Not included: the dust boot.











