Overview
The Pro Comp ES3000 Series shock absorber, part number 329553, uses the vehicle’s factory upper and lower mounts. Its extended, collapsed and travel lengths are vehicle specific.
The shock uses a gas-charged design with 10-stage velocity-sensitive valving. Gas pressure helps keep the damping steady during repeated hard use, and the valving changes the resistance based on how quickly the suspension moves. The piston rod is chrome-hardened at 5/8 inch.
Key features
- 10-stage velocity-sensitive valving.
- A 5/8 inch chrome-hardened piston rod.
- A Teflon rebound stop that limits the return stroke.
- Double-welded shock mounts for strength where the shock attaches.
- Covered by Pro Comp’s limited lifetime warranty.
Before you swap a shock
Shock mounts and bushings wear alongside the shock itself, so inspect them before fitting anything new. Cracked rubber or a loose bolt can make a new shock feel noisy and let it move out of line. Clean the mounting surfaces so the hardware seats fully before tightening.
Pay attention to the piston rod as well. Pitting or scoring can tear the seal and let oil into the rod area, and the rod should slide smoothly through its full travel by hand. A stroke that catches or sticks points to a damaged unit or a bent mount, and replacement is the safer fix.
- Check rubber bushings for splitting or flattening
- Look at the rod for pitting and an oil film
- Wipe mounts clean before installing new hardware
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 329553 |
| UPC | 614901695946 |
| Shock series | ES3000 |
| Extended length | Vehicle specific |
| Collapsed length | Vehicle specific |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Body type | Gas-charged hydraulic body |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Use the lengths of your original shock as the reference.
Two trucks of the same model can use different shock lengths, so confirm the measurements on your own vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Factory mounts can be reused, but check the new shock’s full range of movement against the body and frame before tightening the hardware.
What’s included
One ES3000 shock absorber.
Not included: the dust boot. The shock is sold without one.











