Select your vehicle

Pro Comp ES9000 Series Shock Absorber – 925510

Pro Comp Suspension

Shop Ford Bronco Shock Absorbers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front shock for the 1978-1979 Ford Bronco
  • For 2 to 4 in. of lift
  • Twin-tube, gas-charged ES9000 Series design
  • Factory-style upper and lower mounts; sold as each

Description

Overview

The Pro Comp ES9000 Series shock absorber, part number 925510, is a front twin-tube gas-charged shock for the 1978-1979 Ford Bronco and is a direct fit type. It suits vehicles with 2 to 4 inches of lift.

The twin-tube design with 10-stage velocity-sensitive valving provides a smooth, comfortable ride and supports off-road handling. It has a 1 3/8 inch nylon-banded full-displacement piston head and double-welded shock mounts. Measure your old shock before installing, since the length varies by vehicle. It is not adjustable, has no remote reservoir, has a white finish, and comes without a boot. It uses factory-style upper and lower mounts.

Key features

  • Front shock for the 1978-1979 Ford Bronco
  • For 2 to 4 in. of lift
  • Twin-tube design with 10-stage velocity-sensitive valving
  • Gas charged, with a 1 3/8 nylon-banded full-displacement piston head
  • Double-welded shock mounts
  • Factory-style upper and lower mounts
  • White finish, sold as each

Front end on a classic Bronco

A front shock on a Bronco works with the solid front axle, the track bar and the steering linkage to control axle movement. Because the front end carries load on rough ground, worn shocks let the axle bounce and can make the steering feel loose. Replacing the shock is a good moment to check the components it works against.

Inspect the track bar bushings, control arm bushings and steering stabilizer for wear. Re-tighten the shock fasteners after the first few miles, and check that the brake hose and wiring have room when the front suspension cycles. If the front end has been lifted, measure the shock length before installing to confirm the travel suits the new height.

  • Check track bar and control arm bushings
  • Inspect the steering stabilizer for play
  • Look for leaks at the shock body
  • Re-tighten fasteners after the first few miles

Specifications

Brand Pro Comp Suspension
Part number 925510
UPC 614901072136
Shock series ES9000 Series
Shock design Twin tube, gas charged
Position Front
Lift height 2 to 4 in. lift
Extended length 25.75 in. (description); vehicle specific (specifications)
Collapsed length 15.04 in. (description); vehicle specific (specifications)
Travel length Vehicle specific
Upper mount Factory
Lower mount Factory
Adjustable No
Remote reservoir No
Finish White
Boot included No
Sold as Each
Fit type Direct fit

Vehicle fitment

It fits the 1978-1979 Ford Bronco in the Custom, Northland and Ranger XLT trims.

It is a front-position shock and is not intended for rear mounting. Other Bronco years are not covered. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

A shock affects handling and braking stability, so professional installation is a good idea if you are not experienced. Lift the front end onto jack stands rated for the vehicle’s weight, not a jack by itself. Follow the instructions for mounting hardware and tighten each bolt to the stated torque. Re-tighten after the first few miles. Confirm the brake hose and wiring have clearance when the front suspension cycles fully. Check local rules before altering the truck’s stance.

What’s included

Pro Comp Suspension lists one front shock, sold as each. A boot is not included.

SKU: EXP925510 Category:

Specification

Shipping weight 5.92 lbs
Package dimensions 25.00 × 3.00 × 3.00 in
brands

Fitment

VehicleYearsTrims
Ford Bronco1978–1979Custom, Northland, Ranger XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What Bronco does the Pro Comp 925510 fit?

It fits the 1978-1979 Ford Bronco in the Custom, Northland and Ranger XLT trims. It is a front shock, sold as each.

How much lift is the Pro Comp 925510 for?

It suits vehicles with 2 to 4 in. of lift. It is an ES9000 Series twin-tube gas-charged shock with factory-style upper and lower mounts.

Is the Pro Comp 925510 adjustable?

No. It is not adjustable, has no remote reservoir and comes without a boot. It has a white finish and is sold as each, meaning one shock per purchase.

Should bump stops be checked when fitting new front shocks?

Yes. Worn or missing bump stops can let the axle reach the frame at full compression. Inspect them during shock work and replace any that are cracked or flattened.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ford Bronco Shock Absorbers on Amazon