Overview
The Pro Comp Suspension ES3000 323510 is a hydraulic shock absorber from the ES3000 Series with loop mounts at both ends. It measures 23.27 in extended and 14.54 in collapsed, with 8.93 in of travel. No vehicle is named for this part number, so the lengths are the main points to compare with the shock being replaced.
The shock uses a twin tube cellular gas design with 10-stage velocity-sensitive valving. Its 5/8 inch chrome-hardened piston rod and Teflon rebound stop suit comfortable highway driving and demanding conditions, and double welded mounts add strength. It carries the limited lifetime warranty from Pro Comp Suspension.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Loop upper and lower mounts
- White finish, non-adjustable
- Pro Comp Suspension limited lifetime warranty
Choosing the right length
The extended and collapsed lengths decide how much room a shock has to work, so they matter more than the shock’s appearance. A shock that is too short can bottom out, and one that is too long can stop the suspension from reaching full droop. Measure the old shock with the truck supported at the wheels, then compare those measurements with the new part.
Loop mounts are simple to fit but depend on good bushings to keep the shock quiet. Check the eyes for cracks and the bushings for hardness, since they take the impact of every bump. Worn suspension parts such as bushings and links can make a new shock feel less controlled, so inspect them as part of the job.
- Measure with the vehicle supported at the wheels
- Inspect bushings for cracking or hardness
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 323510 |
| UPC | 614901695731 |
| Shock series | ES3000 |
| Type | Hydraulic, twin tube cellular gas design |
| Extended length | 23.27 in |
| Collapsed length | 14.54 in |
| Travel length | 8.93 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Match the 23.27 in extended length and loop mounts against your current shock.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, part 323510.
Not included: the dust boot.












