Overview
The Pro Comp ES3000 Series Shock Absorber, part number 329500, is a rear hydraulic twin tube shock for a 5 to 7 inch lift. Its lengths are vehicle specific, and it uses factory-style mounts.
The ES3000 is a twin tube cellular gas design built to improve driving comfort and performance on and off the road. Its 10 stage velocity sensitive valving self adjusts to changing road conditions. It uses a 5/8 inch chrome hardened piston rod, a Teflon rebound stop and double welded shock mounts, and it carries a limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10 stage velocity sensitive valving that self adjusts to road conditions
- 5/8 inch chrome hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts; sold each
- Limited lifetime warranty stated by Pro Comp
Rear shock setup
The rear shocks control how the back of the vehicle moves when it loads, rebounds and passes over bumps. Their damping affects braking stability, traction on uneven ground and how the rear end settles after a dip. Matching rear damping to the front keeps the vehicle predictable in turns and on the highway.
A rear shock with factory-style mounts can make installation simpler, but the upper and lower points still need to be cleaned and inspected. Look for cracked bushings, bent brackets and loose fasteners before fitting the new unit. Suspension components should be torqued to the vehicle’s own specifications after the first few drives.
- Clean mounting surfaces before fitting
- Check bushings and brackets for cracks
- Replace rear shocks in pairs
- Inspect brake lines at full rear travel
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXP329500 (329500) |
| UPC | 614901042757 |
| Shock series | ES3000 Series |
| Position | Rear |
| Lift height | With 5 – 7 in. lift |
| Type | Hydraulic |
| Piston rod | 5/8 inch chrome hardened |
| Valving | 10 stage velocity sensitive |
| Extended, collapsed and travel length | Vehicle specific |
| Upper and lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit rear shock for a 5 – 7 in. lift, with vehicle-specific lengths. Confirm the application, lift height and length for your vehicle before ordering.
Because lengths are vehicle specific and no vehicle is named, do not assume this shock fits your truck or Jeep without confirming it with the manufacturer. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Suspension, steering and brake parts are safety-critical, so professional installation is recommended. Support the vehicle on rated jack stands, never on a jack alone. Follow the torque values for your vehicle, and re-check fasteners after the first miles of driving and after off-road use. Have the alignment checked after suspension work.
What’s included
One shock absorber, since the shock is sold each.
Not included: A shock boot is not included.











