Overview
The Pro Comp Suspension ES3000 322508 is a front hydraulic shock absorber with loop mounts at both ends. It measures 22.58 in extended and 13.71 in collapsed, with 8.87 in of travel. It fits the 2000–2005 Ford Excursion, the 1999–2004 Ford F-250 and F-350 Super Duty, the 1989–1990 Ford Ranger, the 1999–2004 Jeep Grand Cherokee (WJ) and the 1994–1997 Mazda B4000 and 1994–1996 Mazda B3000.
Pro Comp rates the shock for 0 in. of lift or drop. Its twin tube cellular gas design, 10-stage velocity-sensitive valving, 5/8 inch chrome-hardened piston rod and Teflon rebound stop are built for both comfortable highway driving and demanding conditions. Double welded mounts and the Pro Comp Suspension limited lifetime warranty complete the design.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Loop upper and lower mounts
- Rated for 0 in. lift or drop
- Pro Comp Suspension limited lifetime warranty
Front shock wear signs
Front shocks help control dive under braking, body roll in corners and steering feel over uneven pavement. When they wear, the front end can feel floaty or wander on the highway, and the tires may show cupping. Because the front axle steers, a worn shock can change how the vehicle tracks more than a rear shock would.
Front shocks are usually changed as a pair on the same axle so both sides damp the same way. Check the upper and lower mounts, the steering linkage and the tie rods while the shock is off, since play in those parts can mimic a bad shock. Loop mounts should be inspected for cracked bushings and tight fasteners.
- Check for fluid on the shock body
- Inspect loop bushings for cracks
- Look for cupped front tire tread
- Test steering play after installation
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 322508 |
| UPC | 614901041637 |
| Shock series | ES3000 |
| Position | Front |
| Type | Hydraulic, twin tube cellular gas design |
| Extended length | 22.58 in |
| Collapsed length | 13.71 in |
| Travel length | 8.87 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Lift height rating | 0 in. lift or drop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 2000–2005 Ford Excursion (Eddie Bauer, Limited, XLS and XLT), the 1999–2004 Ford F-250 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, XL and XLT), the 1999–2004 Ford F-350 Super Duty (same versions), the 1989–1990 Ford Ranger (Custom, S, S Plus, STX and XLT), the 1999–2004 Jeep Grand Cherokee (WJ) (Laredo, Limited, Overland, Special Edition and Sport), the 1994–1996 Mazda B3000 (Base) and the 1994–1997 Mazda B4000 (Base, LE and SE).
Ford Rangers from 1991 and later, Excursions from 2006 and later, and Grand Cherokee models outside the 1999–2004 WJ years are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 0 in. lift or drop rating means the shock is meant for a truck at its factory height. Because the mounts are loops at both ends, check the 22.58 in extended and 13.71 in collapsed lengths against the shock you are removing.
What’s included
One shock absorber, part 322508.
Not included: the dust boot.










