Overview
The Pro Comp Pro Runner part ZX2034 is a rear gas-charged monotube shock absorber with loop-style upper and lower mounts. It is designed for a lift of 0 to 1.5 inches and measures 26.04 inches extended with 9.67 inches of travel.
The specification entry gives the collapsed length as 116.37 inches. That figure appears to be a typing error, because a collapsed length that large cannot sit alongside 26.04 inches extended and 9.67 inches of travel. Confirm the collapsed length with the manufacturer before fitting.
The Pro Runner line is built for late-model trucks, Jeeps and SUVs, with multi-stage valving tuned through dyno and real-world testing. The nitrogen-charged monotube body is zinc plated and clear coated, and the nitrogen charge reduces cavitation during compression and rebound.
The 9.67 in. of travel and the 26.04 in. extended length are the two figures to compare with the shock being replaced. Because the collapsed figure is in question, the installed length should be checked on the vehicle before the rear shock is fitted.
Key features
- Rear placement for a 0 to 1.5 inch lift
- Loop upper and lower mounts
- Multi-stage valving
- Nitrogen gas charge and zinc finish
- Boot included
Checking length before fitting
Length is the first thing to check on any rear shock. A shock that is too long can bind at full extension, and one that is too short can hit its bump stop early. Comparing the new shock with the one being removed, mount center to mount center, catches most fitment problems before the truck is driven.
Measure the old shock with the truck at rest and the wheels on the ground, then compare the extended length and travel with the new unit. Mount style matters as well, since a loop or stem end that does not match the bushing will not seat properly even when the length is right.
- Measure mount center to mount center
- Compare extended length with the old shock
- Confirm the loop mount pattern on both ends
- Check the boot is seated before driving
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2034 |
| UPC | 614901024371 |
| Shock series | Pro Runner |
| Position | Rear |
| Lift height | 0 to 1.5 in. |
| Extended length | 26.04 in. |
| Collapsed length | 116.37 in. as printed (see note above) |
| Travel | 9.67 in. |
| Upper and lower mounts | Loop |
| Adjustable | No |
| Finish | Zinc plated, clear coated |
| Boot included | Yes |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, and check the lift range against your truck.
Installation notes
Because the collapsed length as printed does not look right, confirm the figure with the manufacturer before fitting, and compare the 26.04 in. extended length with the shock being replaced.
What’s included
One rear monotube shock, with its boot.



























