Overview
The Pro Comp ZX2120 is a front Pro Runner SS shock absorber for the 2015–2018 Chevrolet Colorado. It is designed for late model trucks and SUVs with coil-over, strut-style independent front suspensions, and it uses a height-adjustable collar that Pro Comp describes as patent pending.
The collar lets the owner raise the front of the Colorado to clear 32 inch tires, or keep the truck at factory ride height. Pro Comp’s text gives a raise of 1.75 inches for the 32 inch setting, while the feature list gives 2 inches for the height increase, so confirm the figure before choosing tires. The shock keeps the factory coil spring in use, and the coil is not included.
The body is nitrogen charged on a 2 inch diameter, with a zinc plated and clear coated finish. The gas charge reduces cavitation during compression and rebound, and the damping is set for the application.
Key features
- Front position, direct fit
- Height-adjustable collar, patent pending, rotates 180 degrees
- Stock ride height or raised setting for larger tires
- Retains the factory coil spring
- Nitrogen charged, zinc plated, clear coated 2 inch body
Ride height and tire size
Changing front ride height affects the geometry of the whole front end, including camber, caster and the angles of the driveline components. After a height change, an alignment check helps keep tire wear even and steering predictable. Larger tires also change gearing and the load on the drivetrain, which is worth considering before a bigger tire is fitted.
A height adjustment works best when the change is set deliberately and tested. Recheck tire clearance at full steering lock and over bumps, and inspect brake lines and wiring for tension after the front end moves. Keep the collar free of grit so it turns smoothly when it is set again.
- Schedule an alignment after the height change
- Check brake lines for tension
- Confirm tire clearance at full lock
- Inspect the coil spring seats for wear
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2120 |
| UPC | 614901152562 |
| Shock series | Pro Runner SS |
| Position | Front |
| Body diameter | 2 in |
| Charge | Nitrogen |
| Finish | Zinc plated, clear coated |
| Adjustment | Height-adjustable collar, patent pending |
| Coil spring | Factory coil retained, not included |
Vehicle fitment
It is a direct fit for the 2015–2018 Chevrolet Colorado, including the Base, LT, WT, Z71 and ZR2 models.
The list covers the 2015 to 2018 Colorado only, so the earlier and later Colorado years and the GMC Canyon are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the collar before the truck is driven, then check tire clearance at full steering lock. Because the figures for the raised setting differ between Pro Comp’s text and its feature list, measure the actual raise after installation.
What’s included
One front Pro Runner SS shock with height-adjustable collar and boot. The coil spring is not included.










































