Overview
It is a front hydraulic shock absorber for the 1982–1985 Toyota Pickup in the Base, DLX, DLX Turbo and SR5 versions. It measures 25.75 in extended and 15.04 in collapsed, with 10.71 in of travel, and has a stem at the top and a loop at the bottom.
Pro Comp rates the shock for a 4 in. lift. Twin tube cellular gas damping uses 10-stage velocity-sensitive valving, and the 5/8 inch chrome-hardened piston rod has a Teflon rebound stop. Double welded mounts add strength, and the shock is covered by the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Stem upper mount and loop lower mount
- Rated for a 4 in. lift
- Pro Comp Suspension limited lifetime warranty
Pairing shocks with lift parts
A shock is only one part of a lifted suspension. When the ride height changes, the damper’s working angle and travel change too, so the length and mounting points need to suit the lift and the springs. Brake lines, sway bar links and driveshaft angles can also shift as the suspension rises, and those are worth checking before the truck is driven on the highway.
When choosing parts, it helps to think about the whole system. A shock sized for one ride height may bottom out or run out of extension when the springs and blocks change. Many owners replace bushings and check the leaf or coil springs at the same time, so the new damper works with the rest of the setup rather than against it.
- Check brake line length after a lift
- Look at sway bar link length
- Replace worn bushings during the install
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 325518 |
| UPC | 614901042283 |
| Shock series | ES3000 |
| Position | Front |
| Type | Hydraulic, twin tube cellular gas design |
| Extended length | 25.75 in |
| Collapsed length | 15.04 in |
| Travel length | 10.71 in |
| Upper mount | Stem |
| Lower mount | Loop |
| Lift height rating | 4 in. lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1982–1985 Toyota Pickup in the Base, DLX, DLX Turbo and SR5 versions. Pickups from 1981 and earlier and from 1986 onward fall outside this range. Confirm your vehicle’s year, model and trim before ordering.
Toyota Pickups from 1981 and earlier and from 1986 onward are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
At a 4 in. lift rating, this shock is meant for a Toyota with a matching suspension height. Confirm the lift on your Pickup before ordering, and compare the 25.75 in extended and 15.04 in collapsed lengths with your current shock.
What’s included
One shock absorber, part 325518.
Not included: the dust boot.












