Overview
The ZX2102 is a rear Pro Runner monotube shock absorber designed for a 6 inch lift on classic Chevrolet and GMC pickups. It fits the 1969–1986 Chevrolet K10 and K20, the 1987 Chevrolet V10 and V20, and a range of GMC K15, K25, K1500 and K2500 trucks from 1969 to 1986.
The shock is gas charged, with a nitrogen pressurized monotube body that Pro Comp says resists cavitation during compression and rebound. The design is intended to shed heat more efficiently than a twin tube hydraulic shock. Multi-stage valving is tuned to the vehicle, and the body is zinc plated and clear coated.
The ZX2102 fits classic Chevrolet and GMC pickups from 1969 through 1987. A 6 inch lift is a large change for a rear shock, so check the shock’s length and travel against the truck’s installed height before ordering. The gas charged monotube uses a floating piston to keep the oil pressurized during compression.
Key features
- Rear position, direct fit
- Designed for a 6 inch lift
- Gas charged monotube with nitrogen pressurization
- Multi-stage valving tuned to the vehicle
- Zinc plated, clear coated finish
Rear suspension on classic pickups
On a classic pickup the rear suspension is usually built around leaf springs, shackles and a solid axle. A rear shock works alongside those parts to control rebound after the springs compress. When a truck is raised or loaded heavily, the shock is asked to control more movement, so its condition matters more.
Older trucks often have worn shackle bushings, sagging springs and brittle bump stops. Replacing the shock without checking those parts can leave the rear end sloppy or cause it to bottom out. Look at the mounting points on the frame and axle for rust, and inspect the brake and fuel lines near the shock before bolting anything in place.
- Check shackle bushings for wear
- Inspect frame mount points for rust
- Look for sagging leaf springs
- Confirm brake and fuel lines clear the shock
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2102 |
| UPC | 614901095241 |
| Shock series | Pro Runner |
| Position | Rear |
| Lift height | 6 in. |
| Body | Monotube, gas charged |
| Finish | Zinc plated, clear coated |
Vehicle fitment
It is a direct fit for these classic pickups at a 6 inch lift: 1969–1986 Chevrolet K10 and K20, 1987 Chevrolet V10 and V20, 1975–1978 GMC K15 and K25, 1969–1974 GMC K15/K1500 and K25/K2500, and 1979–1986 GMC K1500 and K2500.
The list does not cover the 1960–1968 C/K trucks or the 1988 and later Chevrolet and GMC C/K1500 and K2500 pickups. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear Pro Runner monotube shock, sold as each.


























