Overview
The Pro Comp ES3000 Series shock absorber, part number 327506, is a replacement shock built around the vehicle’s factory upper and lower mounts. Its extended, collapsed and travel lengths vary by vehicle, so it suits a truck only when its mounting centers match the original shock.
This is a twin-tube, gas-charged shock with 10-stage velocity-sensitive valving. The inner valving controls damping as the shock moves, and the chrome-hardened 5/8 inch piston rod carries the load through the seals. Because the length depends on the vehicle, take the measurements from the original shock before you choose this part number.
Key features
- 10-stage velocity-sensitive valving that responds to changes in speed.
- A 5/8 inch chrome-hardened piston rod.
- A Teflon rebound stop for a more comfortable ride at highway speeds.
- Double-welded shock mounts.
- The shock is covered by Pro Comp’s limited lifetime warranty.
Before you swap a shock
A shock absorber controls how quickly the suspension moves after a bump, so it affects both ride comfort and how the tires stay in contact with the ground. Over time the seals and valving wear, and damping can fade even when no leak is visible. Bounce that continues after the truck settles, or a nose-dive under braking, often points to an old shock.
Shocks work as a pair on each axle, so many owners replace both sides together to keep the ride even. Check the upper and lower mounting bushings and bolts at the same time, since worn hardware can make a new shock feel loose. Keep the mounts clean and tight after the first few drives, and watch for fluid on the outside of the body.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 327506 |
| UPC | 614901042634 |
| Shock series | ES3000 |
| Extended length | Vehicle specific |
| Collapsed length | Vehicle specific |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Body type | Hydraulic / gas charged |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, and compare the length and mount style of the shock you are replacing.
Because the lengths are vehicle specific, a shock that looks identical may not match your truck’s mounting height. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the extended and collapsed length of the original shock, and check that the factory mounting points match the shock before you remove the old unit.
What’s included
One ES3000 shock absorber.
Not included: the dust boot.









