Overview
The Pro Comp ES9000 part 929510 is a rear gas-charged shock absorber with a stem-style upper mount and a loop-style lower mount. It is designed for a vehicle with a 4 inch lift and measures 29.77 inches extended, 17.09 inches collapsed and 12.68 inches of travel.
The twin-tube body pairs with 10-stage velocity-sensitive valving and a 1 3/8 inch nylon-banded, full-displacement piston head. It gives a comfortable highway ride and better handling off road, with double-welded shock mounts.
The ES9000 line is built for heavy loads and demanding driving. This unit is sold individually, and shock boots are sold separately, so add a boot as its own item if your setup uses one.
Key features
- Rear placement with stem upper and loop lower mounts
- 10-stage velocity-sensitive valving
- 1 3/8 inch nylon-banded, full-displacement piston head
- Double-welded shock mounts
Mount styles and bushings
Shocks use different mount styles, including stems, loops and eyes, and mixing them can cause binding or early wear. Stem mounts pass through a rubber bushing and are held by a nut, while loop mounts use a bushing sleeve on a bolt. Matching the bushing and hardware to the existing shock keeps the travel clean.
Rear shocks on trucks and SUVs take a lot of load at the mounts, so the rubber bushings and bolts should be inspected each time a shock is changed. Cracked rubber, a loose nut or a bent bracket will change the angle and shorten the life of the new unit. Replace worn bushings before they can damage the new shock.
- Stem mounts: check the bushing and nut
- Loop mounts: check the sleeve and bolt
- Tighten fasteners to the torque given in the vehicle’s service manual
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 929510 |
| UPC | 614901072655 |
| Shock series | ES9000 |
| Position | Rear |
| Lift height | 4 in. |
| Extended length | 29.77 in. |
| Collapsed length | 17.09 in. |
| Travel | 12.68 in. |
| Gas charged | Yes |
| Piston head | 1 3/8 in., nylon-banded, full displacement |
| Upper mount | Stem |
| Lower mount | Loop |
| Adjustable | No |
| Finish | White |
| Boot included | No |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, including the stem upper and loop lower mount layout.
Installation notes
The upper and lower mounts are different styles, so confirm both against the existing shock before installing.
What’s included
One gas-charged rear shock absorber, sold individually.
Not included: shock boots, which are sold separately.











