Overview
The Pro Comp 314515 is a front ES3000 twin tube cellular gas shock with no lift or drop. It is 14.71 inches extended and 9.56 inches collapsed, with 5.15 inches of travel, and it has a stem upper mount and a loop lower mount.
It fits more than fifty trucks and SUVs from 1979 to 2011. The largest groups are Chevrolet and GMC C/K-style pickups, Suburbans and Blazers, Silverado and Sierra 1500 and 2500 trucks, and compact pickups such as the S10, Dakota, Ranger and Toyota T100.
Key features
- Front position with 0 inch lift or drop
- Twin tube cellular gas design
- 10-stage velocity sensitive valving
- Teflon rebound stop
- Double welded shock mounts
Older truck shock choices
A stock height shock is designed to match the original ride height, so it is a practical choice for keeping an older truck close to factory condition. Trucks that have been lifted need a shock matched to that lift, because a stock length can bottom out or run short at the new angle. Measure the old shock’s length before purchasing, since age and wear can change the stroke.
Older trucks often show worn bushings, rusted mounts and tired springs. A new shock on worn hardware may not perform as expected, so inspecting the bushing sleeves, bolts and spring seats at the same time makes sense. Keeping a record of the replacement date helps track future service, and shocks are often replaced in pairs on the same axle to keep handling even.
- Inspect eye bushings and stem mounts for wear
- Check bolts for corrosion before reuse
- Match the stroke to the original shock
- Replace in pairs for even handling
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 314515 |
| Series | ES3000 |
| Position | Front |
| Lift or drop | 0 inches |
| Extended length | 14.71 inches |
| Collapsed length | 9.56 inches |
| Travel | 5.15 inches |
| Upper mount | Stem |
| Lower mount | Loop |
The 314515 is a front shock with 0 inch lift or drop, built as a twin tube cellular gas unit with 10-stage velocity sensitive valving. Its 14.71 inch extended length and 9.56 inch collapsed length give 5.15 inches of travel, and the stem upper mount and loop lower mount must match the truck’s front hardware. Pro Comp’s list is one of the longest in the ES3000 family, so the make, model, year and trim should be matched to the entry before ordering.
Vehicle fitment
It fits the 1979 to 1982 Chevrolet LUV, the 1995 to 2005 Chevrolet Blazer, the 1983 to 2003 Chevrolet S10, the 1988 to 2000 Chevrolet C2500 and C3500 and R20 to R3500 models, the 1999 to 2007 Chevrolet Silverado 1500 and 2500 trucks, the 1995 to 1999 Chevrolet Tahoe, the 1987 to 2004 Dodge Dakota, the 1987 to 1989 Dodge Raider, the 1987 to 1990 and 1998 to 2011 Ford Ranger, the 1988 to 2000 GMC C1500, C2500 and C3500 models, the 1983 to 2001 GMC Jimmy and S15 Jimmy models, the 1999 to 2006 GMC Sierra 1500 and 2500 trucks, the 1992 to 1999 GMC Yukon, the 1996 to 2000 Isuzu Hombre, the 1981 to 1995 Isuzu Pickup, the 1987 to 1991 Isuzu Trooper, the 1986 to 1997 Mazda B-series, the 1989 to 2000 Mitsubishi Montero, the 1984 to 1995 Toyota Pickup and the 1993 to 1998 Toyota T100.
The list is long and covers these models only. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front ES3000 shock.






















