Overview
The Pro Comp ES9000 part 929503 is a rear gas-charged shock absorber for Dodge W-series pickups from 1972 to 1993, including the W100, W150, W200, W250, W300 and W350. It is a 0 in. lift or drop application, so it suits a stock-height setup.
The twin-tube body uses 10-stage velocity-sensitive valving, and the 1 3/8 inch piston head is nylon-banded and full-displacement. This design gives a smooth, comfortable high ride and helps handling off road. Extended length is 29.83 inches and collapsed length is 17.3 inches.
Key features
- Rear placement for Dodge W-series pickups
- 10-stage velocity-sensitive valving
- 1 3/8 inch nylon-banded, full-displacement piston head
- Double-welded shock mounts
Rear shock wear signs
A rear shock controls how the axle moves over bumps and how the body settles under braking and acceleration. As the damping wears, the truck may bounce longer after a dip, feel loose on rough roads, or lean more in turns. Leaking fluid on the shock body is another common sign that the unit is past its useful life.
Rear shocks are usually replaced in pairs so both sides keep matching damping. Inspect the upper and lower mounts and bushings while the unit is off, because worn rubber or bent brackets can make a new shock sit at the wrong angle. Check the leaf springs and axle mounts for loose hardware as well. Keep the old unit until the new one is compared against it, so mount positions and length can be checked.
- Uneven rear tire wear
- Fluid seeping from the shock body
- Clunking when the axle rebounds
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 929503 |
| UPC | 614901072594 |
| Shock series | ES9000 |
| Position | Rear |
| Lift height | 0 in. (lift or drop) |
| Extended length | 29.83 in. (description); vehicle specific (specification entry) |
| Collapsed length | 17.3 in. (description); vehicle specific (specification entry) |
| Gas charged | Yes |
| Piston head | 1 3/8 in., nylon-banded, full displacement |
| Upper and lower mounts | Factory |
| Adjustable | No |
| Finish | White |
| Boot included | No |
Vehicle fitment
It fits the 1972–1977 and 1986–1989 Dodge W100, the 1977–1993 Dodge W150, the 1972–1980 W200 and W300, and the 1981–1993 W250 and W350.
Dodge trucks outside the W-series model years and chassis above are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This shock suits a stock-height application, so check the rear suspension height before installing it. Measure the unit being replaced first, because lengths vary by vehicle.
What’s included
One rear gas-charged shock is supplied, and it comes without a boot.























