Overview
The Pro Comp ES3000 Series shock absorber, part number 329502, is a replacement unit that uses the vehicle’s factory upper and lower mounts. Its extended, collapsed and travel lengths are vehicle specific rather than a single size.
It is a twin-tube, gas-charged design with 10-stage velocity-sensitive valving and a 5/8 inch chrome-hardened piston rod. The Teflon rebound stop controls the return stroke, which helps the shock settle smoothly after a bump.
Key features
- 10-stage velocity-sensitive valving.
- A 5/8 inch chrome-hardened piston rod.
- A Teflon rebound stop that limits the return stroke.
- Double-welded mounts that carry the load at each attachment point.
- Limited lifetime warranty coverage applies to this shock.
Warning signs of worn shocks
A worn shock usually announces itself through the ride. The truck may keep bouncing after a dip, feel floaty at highway speed, or dive hard when the brakes are applied. Oil seepage on the outside of the tube is another sign, and a shock that feels noticeably softer on one side than the other should be checked before the next trip.
Replacing a shock is also a good time to inspect the rest of the damping setup. Mount bushings can split, and bolts can loosen under repeated compression. Tires with cupping or uneven wear often point back to tired shocks, so look at the tread pattern while the truck is raised.
- Continued bouncing after one bump
- Fluid seepage on the tube
- Uneven feel side to side
- Cupped or uneven tire wear
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 329502 |
| UPC | 614901042764 |
| Shock series | ES3000 |
| Extended length | Vehicle specific |
| Collapsed length | Vehicle specific |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
Check fit against your vehicle’s year, model and trim before ordering. Measure the original shock’s length and mounting style first.
Because the lengths are vehicle specific, the same shock number may not fit every truck of a given model. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Factory mounts mean the new shock should bolt into the same points as the original. Measure the old shock first and compare it with the vehicle-specific length information before you remove it.
What’s included
One ES3000 shock absorber.
Not included: a dust boot. Pro Comp lists boot included as No.











