Overview
The Pro Comp Suspension ES3000 325506 is a rear hydraulic shock absorber for older Dodge trucks and a few Toyota and Plymouth models. It fits the 1961–1971 Dodge D100, D200 and D300 pickups, the 1976–1993 Dodge Ramcharger, the 1961–1980 Dodge W200 and W300, the 1981–1993 Dodge W250 and W350, the 1976–1981 Plymouth Trailduster and the 1979–1985 Toyota Pickup.
The shock uses factory upper and lower mounts and is rated for a 4 in. lift. Its lengths are vehicle specific rather than fixed. It is built as twin tube cellular gas, with 10-stage velocity-sensitive valving and a 5/8 inch chrome-hardened piston rod plus a Teflon rebound stop. Double welded mounts and the Pro Comp Suspension limited lifetime warranty come with it.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- Rear position, rated for a 4 in. lift
- Pro Comp Suspension limited lifetime warranty
Keeping older trucks rolling
Older trucks often run suspension that has aged with the body, bushings and springs. Shock performance changes as the rest of the suspension sags or wears, so a new rear shock may feel better than expected even when the springs are tired. Look for leaks, dented bodies and worn mounts when assessing the old unit.
Classic pickups and vans are often driven at lower speeds on mixed surfaces, which calls for steady damping rather than sharp firmness. Check the rear leaf springs or spring hangers while the shock is out. Keeping the shock clean and checking the mounts at each service helps the suspension last longer.
- Inspect leaf springs and spring hangers
- Check that shackles and bushings move freely
- Clean mounting surfaces before reinstalling
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 325506 |
| UPC | 614901042214 |
| Shock series | ES3000 |
| Position | Rear |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Lift height rating | 4 in. lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
The 325506 fits the 1961–1971 Dodge D100, D200 and D300 pickups (Pickup Base and Series Base), the 1976–1993 Dodge Ramcharger (Base, Canyon Sport, Royal SE and SE), the 1961–1977 and 1986–1989 Dodge W100 (Custom, Pickup Base and Series Base), the 1977–1993 Dodge W150 (Base and S), the 1961–1980 Dodge W200 and W300, the 1981–1993 Dodge W250 and W350 (Base), the 1976–1981 Plymouth Trailduster (Base) and the 1979–1985 Toyota Pickup (Base, DLX and SR5). Dodge trucks from 1994 and later, and the 1960 and earlier D-series, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Dodge trucks from 1994 and later, and the 1960 and earlier D-series, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 4 in. lift rating means the shock is meant for a truck with that much suspension height. Because the lengths are vehicle specific, measure the rear shock being replaced before ordering.
What’s included
One shock absorber, part 325506.
Not included: the dust boot.











