Overview
The Pro Comp Suspension ES3000 322504 is a rear hydraulic shock absorber for the 1997–2002 Ford Expedition, in the Eddie Bauer and XLT versions, and the 2002–2004 Jeep Liberty (KJ), in the Limited, Renegade and Sport versions. Pro Comp rates it for 0 to 2.5 in. of lift, and it uses factory upper and lower mounts.
The shock’s lengths are vehicle specific. It is a twin tube cellular gas design with 10-stage velocity-sensitive valving, a 5/8 inch chrome-hardened piston rod and a Teflon rebound stop. It is built for a comfortable highway ride and can handle demanding conditions. The double welded mounts carry the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- Rated for 0 to 2.5 in. of lift
- Pro Comp Suspension limited lifetime warranty
Lift, load and rear shock life
Rear shocks carry more load when a vehicle is loaded with gear, a trailer or passengers, and their working life depends on how often they run near the ends of their travel. Harder use on rough roads and a heavily loaded cargo area can wear seals and valving sooner. Keeping tires at the correct pressure and avoiding repeated hard bottoming helps the shock last.
Lift height changes the shock’s working range. A shock suited to a small lift can be stressed by a larger one, and a suspension that sits lower than designed compresses the shock more often. Before fitting, check the vehicle’s current ride height and confirm that the new shock’s lengths match the one being removed.
- Note the ride height before removal
- Check for leaks on both rear shocks
- Inspect upper and lower mounts for wear
- Replace bump stops if they are cracked
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 322504 |
| UPC | 614901041583 |
| Shock series | ES3000 |
| Position | Rear |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Lift height rating | 0 to 2.5 in. of lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1997–2002 Ford Expedition in the Eddie Bauer and XLT versions, and the 2002–2004 Jeep Liberty (KJ) in the Limited, Renegade and Sport versions.
Ford Expeditions from 2003 and later and Jeep Liberty models from 2005 and later are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 0 to 2.5 in. lift rating covers a modest lift range, so check your vehicle’s suspension height before fitting. Compare the vehicle-specific lengths with the rear shock being replaced before ordering.
What’s included
One shock absorber, part 322504.
Not included: the dust boot.










