Overview
The Pro Comp 317501 is an ES3000 twin tube cellular gas shock with loop mounts at both ends. It is 15.55 inches extended and 11.05 inches collapsed, with 6.50 inches of travel.
The shock uses 10-stage velocity sensitive valving and is white. It is not adjustable and sold as each.
Key features
- Twin tube cellular gas design
- 10-stage velocity sensitive valving
- 5/8-inch chrome hardened piston rod
- Teflon rebound stop
- Limited lifetime warranty
Loop mounts and installation check
Loop mounts put the shock’s pivot in a bushing at each end, so the bushings take much of the side load from the suspension. When the shock is fitted, the bushings should sit square in their brackets and the bolts should be tightened to the factory torque setting.
Non-adjustable shocks are set at the factory for a single damping curve. That makes them simple to live with, since there is nothing to change, but it also means the shock cannot be tuned to a heavier load. Matching the replacement to the truck’s original weight and use keeps the ride consistent.
Look at the rod for scoring after the old shock is removed, since a scored rod can tear the seal in a new shock. Wipe the rod and check the dust area for debris before fitting the replacement.
- Check loop bushings for cracks
- Wipe the rod before fitting
- Tighten bolts to the factory torque setting
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 317501 |
| Series | ES3000 |
| Extended length | 15.55 inches |
| Collapsed length | 11.05 inches |
| Travel | 6.50 inches |
| Upper and lower mounts | Loop |
| Adjustable | No |
| Finish | White |
The 317501 uses loop mounts at both ends and a twin tube cellular gas design. It measures 15.55 inches extended and 11.05 inches collapsed, giving 6.50 inches of travel. Pro Comp built the shock with 10-stage velocity sensitive valving, a Teflon rebound stop and a 5/8 inch chrome hardened piston rod. The double welded shock mounts are the parts that take the load from the truck into the shock body.
The shock is white and not adjustable, with no remote reservoir. No vehicle is named, so the loop mounts and the two lengths should be compared with the original shock before ordering.
The shock is non-adjustable, so its damping stays at the factory setting.
Vehicle fitment
No truck or year is named for this shock. Compare its loop mounts and 15.55 inch extended length with your original shock before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One ES3000 shock.







