Overview
The Pro Comp Pro Runner Monotube Shock Absorber, part number ZX2101, is a front nitrogen gas charged monotube shock for classic Chevrolet and GMC trucks. It fits the 1969–1986 Chevrolet K10 and K20, the 1987 Chevrolet V10 and V20, and several GMC K15, K25, K1500 and K2500 years through 1986, with a 6 inch lift range.
The valving is tuned through dyno and real-world testing, with multi-stage valving set for each application. The brushed, zinc plated monotube body holds nitrogen gas to prevent cavitation during compression and rebound. The gas charge helps the shock shed heat and reduces shock fade.
Key features
- Gas charged monotube design
- Nitrogen charge to prevent cavitation
- Multi-stage valving tuned to each application
- 2-inch diameter body with brushed zinc and clear coat finish
- Rubber bushing and black polyurethane boots included
- 6 inch lift range
Before you buy
Front shocks on a lifted classic truck work hard during steering, braking and bumps. A shock matched to the suspension helps control body motion on the road and on rough trails. A gas charged monotube design keeps the damping in a single tube, which suits drivers who notice fade when driving hard for long stretches.
Choosing a shock starts with the lift on your truck. A shock that is too short can bottom out or limit suspension travel, while one that is too long can bind at full compression. Measure the installed length of the old shock and compare it with the new one before ordering.
- Measure the installed length of the old shock
- Match the shock to your lift and ride height
- Inspect bushings and boots when the shock is removed
- Replace front shocks in pairs for even damping side to side
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2101 |
| UPC | 614901095227 |
| Series | Pro Runner |
| Position | Front |
| Body diameter | 2 inches |
| Lift range | 6 inches |
| Gas charged | Yes, nitrogen |
| Finish | Brushed zinc and clear coat |
| Included | Rubber bushing and black polyurethane shock boots |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1969–1986 Chevrolet K10 and K20 pickups, the 1987 Chevrolet V10 and V20, the 1975–1978 GMC K15 and K25, the 1969–1974 GMC K15/K1500 and K25/K2500, and the 1979–1986 GMC K1500 and K2500. Confirm your vehicle’s year, model and trim before ordering.
The fitment data does not include Chevrolet or GMC K-series trucks from 1988 on, or any Ford or Dodge models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pro Comp gives this shock a 6 inch lift range, so check its length against your lift and ride height before installing. The shock uses a rubber bushing at the mount, and black polyurethane boots are included, so no separate boots are needed.
What’s included
A rubber bushing and black polyurethane shock boots.

























