Select your vehicle
-13%

Pro Comp ES3000 Series Shock Absorber – 314509

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp ES3000 shock 314509 with factory upper and lower mounts
  • Lengths and travel vehicle specific
  • Twin tube cellular gas, white, sold as each

Description

Overview

The 314509 is an ES3000 twin tube cellular gas shock with factory upper and lower mounts. Its extended length, collapsed length and travel depend on the vehicle it is fitted to.

It uses 10-stage velocity sensitive valving, is not adjustable and is finished in white. It is sold as a direct fit replacement.

Key features

  • Twin tube cellular gas design
  • 10-stage velocity sensitive valving
  • Teflon rebound stop
  • Double welded shock mounts
  • Limited lifetime warranty

Replacing shocks with factory mounts

Shocks that reuse factory mounts usually fit with the original hardware, which keeps installation straightforward. Still, factory bushings age, and a worn bushing can change how the shock sits, so inspecting the rubber is worthwhile before the new shock goes in. Measure the old shock’s installed length and compare it with the new unit before removing the first bolt.

Because the damping is set at the factory, a shock with the right mounts and length will work best when the rest of the suspension is in good shape. Worn springs, bent brackets and seized bolts can all change how the shock loads. Use new hardware where the old bolts show corrosion, and check the shock again after the first few drives.

Specifications

Brand Pro Comp Suspension
Part number 314509
Series ES3000
Length, extended, collapsed and travel Vehicle specific
Upper and lower mounts Factory
Adjustable No
Finish White
Sold as Each

The 314509 uses factory upper and lower mounts, so it reuses the original mounting points. Its lengths and travel depend on the vehicle, so measure the old shock before ordering the new one. The twin tube cellular gas design, 10-stage velocity sensitive valving and Teflon rebound stop set the ride, and the double welded mounts carry the load.

Because it is a direct fit, the mounts and length are the deciding checks.

Pro Comp backs the ES3000 line with its limited lifetime warranty, which covers the shock for as long as the owner keeps the vehicle it was fitted to.

Vehicle fitment

No vehicle is named for this shock. Match its factory mounts and vehicle specific length to your truck before ordering.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

One ES3000 shock.

SKU: EXP314509 Category:

Specification

Shipping weight 4.00 lbs
Package dimensions 25.00 × 3.00 × 3.00 in
brands

Questions & Answers

Does the Pro Comp 314509 use factory mounts?

Yes. It uses factory upper and lower mounts, and its lengths are vehicle specific. Measure the original shock and compare the mounting points before ordering the replacement.

Is the 314509 adjustable?

No. The shock is not adjustable and is finished in white. Its damping is set by the valving built into the unit at the factory, and the owner cannot change it.

Does the 314509 come with a warranty?

Yes. The ES3000 line carries a limited lifetime warranty, and the 314509 is part of it. Store the purchase receipt with the truck's records in case a claim comes up.

Should the springs be checked when replacing shocks?

Yes, the springs should be looked at while the shock is out. Sagging springs or cracked coils change the ride height and load the shock differently. Replacing a shock on a sagging spring can shorten the life of the new unit.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon