Overview
The Pro Comp Suspension ES3000 324560 is a hydraulic shock absorber from the ES3000 Series. Its extended, collapsed and travel lengths are vehicle specific, and it uses the factory upper and lower mounts. No make, model or year is named for this part number.
The ES3000 is a twin tube cellular gas design with 10-stage velocity-sensitive valving. A 5/8 inch chrome-hardened piston rod and Teflon rebound stop are built into the shock, and it is intended for a comfortable highway ride while handling demanding driving. Double welded mounts and the Pro Comp Suspension limited lifetime warranty complete the package. Lengths are vehicle specific, so the shock being replaced is the reference to measure against.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- White finish
- Pro Comp Suspension limited lifetime warranty
Choosing between shocks in a set
Shocks rarely fail one at a time. When one unit on an axle wears out, the other side is usually close behind, so inspecting the pair before ordering can save a second trip. Note how each shock is mounted, the length of the old unit and any signs of leaking or dents, and keep those notes handy when comparing parts.
Hydraulic shocks are often judged by how they feel over time. A unit that is slightly firm on pavement may suit rough trails, while a softer feel can be better for daily driving. Consider the terrain you drive most and how heavily the vehicle is loaded. Records of the old shock’s length and mounting points make it easier to confirm a replacement without guesswork.
- Measure the old shock’s extended and collapsed lengths
- Photograph the mounts before removal
- Replace both shocks on the same axle when wear is uneven
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 324560 |
| UPC | 614901324563 |
| Shock series | ES3000 |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Verify fit against your vehicle’s year, model and trim before buying. Compare the factory mount points and vehicle-specific lengths with the shock you are replacing.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, part 324560.
Not included: the dust boot.







