Overview
The Pro Comp Pro Runner part ZX2027 is a rear gas-charged monotube shock absorber with loop-style upper and lower mounts, designed for a lift of 0 to 1.5 inches. It measures 27.40 inches extended, 17.42 inches collapsed and 9.98 inches of travel.
The Pro Runner line is tuned for late-model trucks and Jeeps through dyno and real-world testing, using multi-stage valving. Nitrogen charging reduces cavitation, and the zinc plated, clear coated body sheds heat more efficiently than a conventional hydraulic shock. The design is suited to towing and rough desert driving.
The lift range of 0 to 1.5 inches, the loop mounts and the 9.98 in. of travel are the figures to match against your current setup before installing. The extended length of 27.40 in. and collapsed length of 17.42 in. are the reference measurements for the shock.
Key features
- Rear placement for a 0 to 1.5 inch lift
- Loop upper and lower mounts
- Multi-stage valving
- Monotube body with a nitrogen charge
- Boot included
Choosing a lift height
Lift height changes the angle the shock works at, and a rear shock that suits a 0 to 1.5 inch lift may feel different on a stock truck. As the suspension rises, the shock extends farther and its damping has to handle a different part of the stroke, so match the shock to the lift you actually run.
Pickups used for hauling often ride with more weight over the rear axle. In that case a shock with a nitrogen charge helps damping stay steady during repeated loading. Before buying, measure the current shock, confirm the loop mounts at both ends and think about the tires and load you plan to carry.
- Measure the current rear shock first
- Confirm the loop mounts at both ends
- Consider tire size and cargo weight
- Replace rear shocks in pairs
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2027 |
| UPC | 614901032253 |
| Shock series | Pro Runner |
| Position | Rear |
| Lift height | 0 to 1.5 in. |
| Extended length | 27.40 in. |
| Collapsed length | 17.42 in. |
| Travel | 9.98 in. |
| Upper and lower mounts | Loop |
| Adjustable | No |
| Finish | Zinc plated, clear coated |
| Boot included | Yes |
Vehicle fitment
It fits the 1994–2003 and 2005–2008 Dodge Ram 1500, the 2003–2010 Dodge Ram 2500 and the 2011–2012 Ram 2500.
The 2004 Ram 1500 and Ram 1500 years from 2009 on are not on this list, and neither are Ram 3500 models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 2004 Ram 1500 falls between the listed ranges, so confirm the year of your truck before fitting, and check the loop mounts on both ends.
What’s included
One rear shock with loop mounts, plus its boot.





























