Overview
The Pro Comp 929560 is a shock from the ES9000 Series, built as a nitrogen gas charged twin tube. Pro Comp positions the ES9000 for drivers who need extra capacity for heavy loads, and this part number is one shock sold as a single unit.
The 10 stage velocity sensitive valving is meant to keep the highway ride smooth and comfortable, while improving handling off road. A 1 3/8 inch nylon banded full displacement piston head works with double welded shock mounts, which Pro Comp says give strength and long life.
The 929560 is a universal fit shock. Because it has to match the length and mounting of the vehicle it is installed on, confirm those measurements before ordering.
Key features
- Nitrogen gas charged twin tube
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded piston head
- Double welded shock mounts
- Designed for heavy loads and off-road use
Installing a replacement shock
Before installing a replacement shock, measure the old unit in its installed position and compare it with the new shock’s collapsed and extended lengths. Mount style matters as much as length. Eye, stem and loop mounts each seat differently, and forcing a mismatched shock can bind the bushing or damage the body.
Install with the vehicle supported and the axle at its normal position, then tighten the mounts to the torque your vehicle’s service information gives. Cycle the shock by hand after installation to check for binding. A new shock that moves freely through its travel, without noise at the ends of its stroke, is seated correctly.
- Clean the shaft before fitting so dirt does not enter the seal
- Check bushings and bracket alignment before tightening
- Test drive on a familiar road and recheck the bolts afterwards
- Note any leaks or unusual sounds in the first week
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 929560 |
| UPC | 614901696592 |
| Shock series | ES9000 Series |
| Body | Twin tube, nitrogen gas charged |
| Valving | 10 stage, velocity sensitive |
| Piston head | 1 3/8 in, nylon banded, full displacement |
| Mounts | Double welded |
| Fitment type | Universal fit |
Vehicle fitment
This is a universal fit shock, so the extended length, collapsed length and mount style must suit your vehicle. Confirm fit for your vehicle before ordering, including its model and trim.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One ES9000 Series shock absorber, sold as a single unit.












