Overview
The Pro Comp Pro Runner part ZX2042 is a rear gas-charged monotube shock absorber with loop-style upper and lower mounts, designed for a 4 inch lift. It measures 32.54 inches extended, 19.98 inches collapsed and 12.56 inches of travel, and it is not adjustable.
The Pro Runner line is tuned for late-model trucks, Jeeps and SUVs, with multi-stage valving developed through dyno and real-world testing. The zinc plated, clear coated body is nitrogen charged, which limits cavitation during compression and rebound.
Travel is the distance the suspension can compress and extend between its fully extended and fully collapsed lengths. Here the difference between 32.54 inches and 19.98 inches is the 12.56 inches of travel listed.
This rear shock is built for late-model trucks, Jeeps and SUVs. The loop mounts at both ends, the 4 inch lift and the included boot are the installation details to plan around. Confirm the 4 inch lift on the vehicle before ordering, since the mount and lift details decide whether the shock fits.
Key features
- Rear placement for a 4 inch lift
- Loop upper and lower mounts
- Multi-stage valving
- Nitrogen gas charge with a zinc finish
- Boot included
Travel and ride height
Travel is the distance a suspension can move between its fully extended and fully collapsed lengths. A shock that runs out of travel can bottom out on rough ground, so the length range should match how far the suspension moves. When replacing a rear shock, compare its installed length with the old unit at the same ride height rather than relying on the number alone.
Ride height and travel go together. A lift changes the working range of the shock, and bump stops limit what the suspension can do at the end of its movement. Inspect the bump stops and the rear shock mounts together, since wear in one can shift the load on the other.
- Compare installed length at the same ride height
- Check bump stops for wear
- Look for loose or cracked mounts
- Inspect for bottoming marks on the body
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2042 |
| UPC | 614901024456 |
| Shock series | Pro Runner |
| Position | Rear |
| Lift height | 4 in. |
| Extended length | 32.54 in. |
| Collapsed length | 19.98 in. |
| Travel | 12.56 in. |
| Upper and lower mounts | Loop |
| Adjustable | No |
| Finish | Zinc plated, clear coated |
| Boot included | Yes |
Vehicle fitment
Confirm the year, model and trim of your truck, Jeep or SUV before ordering.
Installation notes
Confirm the 4 inch lift on your truck, and compare the 32.54 in. extended and 19.98 in. collapsed lengths with the shock being replaced before fitting.
What’s included
One rear monotube shock, with its boot.






























