Overview
The Pro Comp ZX5078 is a front Black Series 2.75 coilover bypass shock absorber for the 2014–2015 Toyota Tundra, designed for a 4 inch lift. It uses a long travel system.
It is a gas charged monotube, with a nitrogen charge that keeps the oil under pressure during compression and rebound. The design dissipates heat more efficiently than a traditional twin tube hydraulic shock. Valving is multi-stage and tuned for the vehicle, which supports ride quality and handling.
It is a monotube design, like the rest of the Pro Runner family. The bypass design is a front position unit, so it fits at the front of the Tundra.
Pro Comp’s lift figure for this shock is 4 inches, and the long travel system is listed with the front position. The shock is sold as a single unit, so a front pair needs two of them.
Key features
- Front position, direct fit
- Black Series 2.75 coilover bypass design
- Long travel system
- Gas charged monotube with multi-stage valving
- Designed for a 4 inch lift
Bypass shocks and ride height
A bypass shock routes fluid through a separate path, so the damping can be controlled apart from the main body. That design is commonly used on trucks that see heavy off-road use, where repeated hard compression can heat a standard shock. Heat management and steady damping matter most when the front suspension is raised.
Because ride height changes the angles of the front suspension, check the front geometry after installation and look for even tire wear. The hoses, fittings and mounting points of a bypass unit should be inspected at regular intervals, since a leak or loose fitting can change the damping behavior. Keep the spring seats clean and check them for cracks.
- Inspect hoses and fittings for leaks
- Check mounting points for play
- Verify front alignment after lifting
- Watch for uneven tire wear
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX5078 |
| UPC | 614901216592 |
| Shock series | Black Series |
| Type | 2.75 coilover bypass shock |
| Position | Front |
| Lift height | 4 in. |
| Travel system | Long travel |
| Body | Monotube, gas charged |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2014–2015 Toyota Tundra at a 4 inch lift, in the front position.
The list covers the 2014 and 2015 Tundra only, so the 2016 and newer Tundra are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock is designed for a 4 inch lift, so check the front ride height after installation against that figure.
What’s included
One front Black Series 2.75 coilover bypass shock.









