Overview
The Pro Comp 314553 is a front ES3000 twin tube cellular gas shock for a 0 to 3 inch lift. It fits the 1994 to 2001 Dodge Ram 1500, the 1994 to 2002 Ram 2500 and the 1994 to 2001 Ram 3500.
The shock uses factory upper and lower mounts, and its extended length, collapsed length and travel are vehicle specific. It is white, not adjustable and sold as each.
Key features
- Front position for a 0 to 3 inch lift
- Twin tube cellular gas design
- 10-stage velocity sensitive valving
- Teflon rebound stop
- Double welded shock mounts
Factory mounts and bushing checks
Factory mounts hold a shock in the same position the original part used, which keeps the geometry of the suspension correct. When the mounts are worn, the shock can move side to side, make clunking noises and wear the bushings quickly. Inspect the rubber bushings and the metal sleeves before fitting, and replace any that are cracked or collapsed.
On a Ram with a lift, the new shock must still reach the mounts without binding. Check the collapsed length against the spring height and make sure the piston rod does not touch any part of the suspension at full compression. Tighten the mounting hardware to the factory torque after the first drive.
- Replace collapsed or cracked bushings
- Check for binding at full compression
- Retorque hardware after the first drive
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 314553 |
| Series | ES3000 |
| Position | Front |
| Lift | 0 to 3 inches |
| Length, extended, collapsed and travel | Vehicle specific |
| Upper and lower mounts | Factory |
| Adjustable | No |
| Finish | White |
The 314553 is a front shock for a 0 to 3 inch lift, and its factory upper and lower mounts are designed to fit the original Ram hardware. The lengths are vehicle specific, so the old shock must be measured before the new one is ordered. The twin tube cellular gas design, 10-stage velocity sensitive valving and Teflon rebound stop give the shock a controlled ride on the highway and on rough ground.
Because the lift range is 0 to 3 inches, the owner should confirm how much front height the truck currently runs before ordering, and the alignment should be checked afterward.
Vehicle fitment
It fits the 1994 to 2001 Dodge Ram 1500 in the Base, Laramie, Sport and WS trims, the 1994 to 2002 Dodge Ram 2500 in the Base trim and the 1994 to 2001 Dodge Ram 3500 in the Base trim.
The list covers the 1994 to 2002 Ram trucks only, and only the Base trim on the 2500 and 3500. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the lengths are vehicle specific, measure the original shock before ordering and match the factory mounts to the truck.
What’s included
One front ES3000 shock.












