Select your vehicle
-13%

Pro Comp Pro Runner Monotube Shock Absorber – ZX2012

Pro Comp Suspension

Shop Toyota Tacoma Shock Absorbers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front Pro Runner monotube shock, part number ZX2012, with loop upper and lower mounts
  • Fits 2005–2016 Toyota Tacoma
  • Designed for a 0 to 1.5 in. lift; not adjustable
  • Extended 22.55 in., collapsed 14.13 in., travel 8.42 in.

Description

Overview

The ZX2012 is a front gas-charged monotube shock absorber for the 2005 to 2016 Toyota Tacoma. It has loop-style upper and lower mounts, is designed for a 0 to 1.5 inch lift and measures 22.55 inches extended.

The specification entry gives 14.13 inches collapsed and 8.42 inches of travel, and the shock is not adjustable. Pro Comp describes its multi-stage valving as tuned for each vehicle, with a nitrogen-charged monotube body that is zinc plated and clear coated.

Monotube shocks separate the oil and gas into one tube with a floating piston, so the pressurized nitrogen pushes back against foaming oil. Shock fade is the loss of damping that builds up when a shock overheats on repeated hard use. Confirm your truck’s lift height against the 0 to 1.5 inch range before ordering.

Key features

  • Front position with loop upper and lower mounts
  • Monotube body with a nitrogen gas charge
  • Multi-stage valving tuned for each vehicle application.
  • Zinc plated, clear-coated finish
  • Boot included

Before you install

Front shocks carry much of the load when a truck runs with added height, because the damper works through a changed angle compared with stock. Before buying, decide how much lift you run and compare it with the 0 to 1.5 inch range, and consider whether the front springs or control arms are also due for replacement. Signs that the old unit is worn include bouncing that continues after bumps, nose dive under braking and oil residue on the body.

When fitting the new shock, inspect the upper and lower mounts for cracking, and make sure the boot seats fully over the shaft so grit stays out of the seal. After the first few drives, recheck the mounting hardware and listen for knocks, which can point to a loose bushing or a bent mount.

  • Inspect mounts and bushings before installing
  • Seat the boot fully over the shaft

Specifications

Brand Pro Comp Suspension
Part number ZX2012
UPC 614901024111
Shock series Pro Runner
Position Front
Lift height 0 to 1.5 in.
Extended length 22.55 in.
Collapsed length 14.13 in.
Travel 8.42 in.
Upper and lower mounts Loop
Adjustable No
Finish Zinc plated, clear coated
Boot included Yes

Vehicle fitment

It fits the 2005–2016 Toyota Tacoma, including TRD Off-Road and TRD Pro versions.

Tacoma model years outside 2005–2016, and other Toyota models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Confirm your truck’s lift height is within 0 to 1.5 inches before installing.

What’s included

One front monotube shock, with its boot.

SKU: EXPZX2012 Category:

Specification

Shipping weight 7.00 lbs
Package dimensions 25.00 × 3.00 × 3.00 in
brands

Fitment

VehicleYearsTrims
Toyota Tacoma2005–2016Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport, X-Runner

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the ZX2012 fit a 2016 Tacoma?

Yes. The 2005–2016 Toyota Tacoma is covered, so a 2016 model fits. Confirm your vehicle's year, model and trim before installing the shock.

What lift height is the ZX2012 for?

It is designed for a 0 to 1.5 inch lift. Confirm your lift height before installing the shock, since no higher range applies to this part.

Is the ZX2012 a front shock?

Yes. It is a front shock with loop mounts at both ends. It is a gas-charged, non-adjustable monotube design, so it does not offer adjustable damping.

How can I tell if this shock needs replacing?

Common signs include bouncing that continues after bumps, fluid on the body and nose dive during braking. Check the mounts and boot at the same time, since damage there can look like shock wear.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Toyota Tacoma Shock Absorbers on Amazon