Overview
The Pro Comp 41 Series Phaser 20×9 wheel, part number PXA5041-295552, is a 20-inch aluminum split spoke wheel with a 9-inch width. It uses a 5 on 150 bolt pattern and a satin black finish, named in the series as 41 Series Phaser satin black.
The wheel has a 110 center bore, a positive 6 offset and a backspacing of 5.25. The positive offset places the mounting face further inward than negative-offset 20-inch wheels. The alloy is low-pressure cast, and the wheel is universal fit.
Key features
- Low-pressure cast aluminum
- 20-inch diameter and 9-inch width
- 5 on 150 bolt pattern
- Center bore 110
- Offset 6 with backspacing 5.25
- Satin black split spoke design
Positive offset and clearance
Offset sets where the mounting face sits relative to the centerline of the wheel. A positive offset moves the face toward the vehicle, which narrows the room between the back of the wheel and the inner suspension and brake parts. Before buying, measure that space on the vehicle itself rather than relying on width alone.
A larger diameter wheel also changes tire options. A tire sized for the rim must clear the fender at full steering lock and under suspension travel. Sidewall height and overall diameter should be compared with the original tire so speedometer readings and ground clearance stay within normal limits.
Inspect the wheel after the first drives. Look for rubbing marks on the inner barrel, check the lug nuts, and watch for vibration that could point to a rim or tire problem. Clean spokes with mild soap and water, and avoid abrasive pads on the satin finish.
- Measure inner clearance to the caliper and suspension
- Compare tire overall diameter with the original
- Check for rubbing on the inner barrel after driving
- Clean the satin finish with mild soap and water
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5041-295552 |
| Wheel diameter | 20 inches |
| Wheel width | 9 inches |
| Bolt pattern | 5 on 150 |
| Center bore | 110 |
| Offset | 6 |
| Backspacing | 5.25 |
| Style | Split spoke |
| Finish | Satin black |
| Construction | Aluminum |
| Series | 41 Series Phaser |
Vehicle fitment
This 20×9 wheel is universal fit and is not tied to a particular vehicle. Match the 5 on 150 pattern and 110 center bore to the hub, then check the positive 6 offset and 20-inch size against brake and suspension clearance.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 20-inch wheel with positive offset leaves less room behind the spoke face for the caliper, so measure the inner clearance before mounting the wheel.
The 20-inch, 9-inch wheel uses a 5 on 150 pattern and a 110 center bore. A positive 6 offset with 5.25 backspacing places the face farther inward, so measure inner clearance to the caliper and suspension.
What’s included
One 20×9 satin black wheel is included. Verify the contents against your installation before starting.











