Overview
The Pro Comp PXA1069-7973 is a 17×9 polished aluminum wheel from the Pro Comp 69 Series Vintage line, with a Holes style face and a 5 on 5 bolt pattern. It is sold as one wheel with a center bore of 125 and an offset of -6.
Vintage alloys are low-pressure cast and available in black, chrome or polished, pairing a head-turning look with light weight. This polished version has a 4.75 backspacing, and the Vintage line is built with a high offset for brake clearance on trucks and SUVs.
Key features
- Low-pressure cast aluminum
- Holes style face
- 17-inch diameter, 9-inch width
- 5 on 5 bolt pattern
- Center bore of 125
- Offset -6 with 4.75 backspacing
Brake and fender clearance
Brake caliper clearance depends on how the rim’s mounting face sits relative to the hub, along with the 4.75 backspacing. Calipers vary between trucks, so measure the largest caliper in the wheel’s path before the first install.
Tire choice affects the whole picture. A wider tire adds width at the sidewall and can contact the fender at full steering lock, while a taller tire can reduce brake and spring room. Test-fit with the tire you plan to run, then check steering travel and brake clearance together before the vehicle leaves the driveway.
Inspect the mounting face and bolt holes after the first few trips, looking for cracks, bent edges or loose lug nuts. Polished finishes show scratches sooner than black finishes, so keep a soft cloth and mild cleaner handy for routine care.
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA1069-7973 |
| Series | 69 Series Vintage (Classic) |
| Style | Holes |
| Construction | Aluminum |
| Finish | Polished |
| Diameter | 17 inches |
| Width | 9 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 125 |
| Offset | -6 |
| Backspacing | 4.75 |
Vehicle fitment
The 5 on 5 hub with a 125 center bore is the match to check first, and the -6 offset then needs a fender and caliper check. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Only a five-lug hub in a 5 on 5 layout accepts this wheel. Confirm the 125 center bore seats on the hub pilot, and test-fit the rim with the chosen tire before the first off-road trip. Five lug holes on a 5 on 5 spacing must match the hub exactly, and the 125 center bore has to seat on the hub pilot. The 9-inch width and -6 offset set how the tire sits relative to the fender, so test-fit with the chosen tire. The 4.75 backspacing places the inner lip behind the mounting face, which matters for brake caliper and suspension room. Choose a tire width suited to a 9-inch rim and check clearance at full steering lock before the vehicle goes off road.
What’s included
One 17×9 polished aluminum wheel. Compare the package with your hub hardware needs before installing.











