Overview
The Pro Comp 43 Series Sledge 20×9 wheel, part number PXA5143-2983, is a 20-inch aluminum spoke wheel that is 9 inches wide. The bolt pattern is 6 on 5.5, and the finish is satin black with milled accents, which the series name gives as 43 Series Sledge satin black and milled.
The wheel has a 125 center bore, a 0 offset and a backspacing of 5. It is low-pressure cast and rated for 2500 to 3650 lbs per wheel. It is universal fit and not matched to a make, model or year.
Key features
- Low-pressure cast aluminum
- 20-inch diameter, 9-inch width
- 6 on 5.5 bolt pattern
- Center bore 125
- Offset 0 and backspacing 5
- Satin black spoke design with milled accents
Large wheels and brake clearance
A 20-inch wheel leaves less room around the caliper than smaller sizes, so brake clearance is the first thing to confirm. Check the caliper body, the rotor’s outer edge and the brake lines against the inside of the spokes before mounting. Test-fit with the brakes installed and turn the steering through its full range.
Lower-profile tires on a large rim change ride firmness and reduce sidewall cushioning, which matters on rough trails. Load rating matters too: the tire’s load index should suit the vehicle, and the wheel’s rating should be considered alongside it. Check lug nuts for seat wear after the first few drives on new wheels, and re-torque them after that.
- Check caliper and rotor clearance
- Confirm tire load index matches the vehicle
- Re-torque lug nuts after early drives
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5143-2983 |
| Wheel diameter | 20 inches |
| Wheel width | 9 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 125 |
| Offset | 0 |
| Backspacing | 5 |
| Load rating | 2500 to 3650 lbs per wheel. |
| Style | Spoke |
| Finish | Satin black, milled |
| Construction | Aluminum |
| Series | 43 Series Sledge |
Vehicle fitment
This wheel is universal fit and is not matched to a make, model or year. Check the 6 on 5.5 pattern and 125 center bore against your hub, then confirm the 20-inch diameter clears the brake and suspension parts.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 20-inch wheel leaves less room around the caliper than smaller sizes. Measure the caliper and tire before mounting, and test-fit with the brakes installed.
The 125 center bore and 6 on 5.5 pattern must match the hub, and the 0 offset keeps the face centered. The 9-inch width and 20-inch diameter describe the rim, so tire fit should be confirmed as well.
What’s included
One 20×9 satin black wheel with milled accents. Confirm the lug nuts and center caps you need before mounting.











