Overview
The Pro Comp PXA7032-6873 is a 16×8 aluminum spoke wheel in the 32 Series Bandido line, finished in flat black. It is built on a 5 on 5 bolt pattern with a center bore of 83, a 0 offset and a backspacing of 4.5.
The 5 on 5 version matches the 5 on 4.5 Bandido in the same 16-inch size, and the two differ in the bolt pattern they fit. The series is cast aluminum made with low-pressure casting technology.
The 5 on 5 pattern is the first measurement to match, followed by the 83 center bore. The 0 offset and 4.5 backspacing place the spoke face near the centerline of the wheel, so check the clearance at the caliper and the suspension.
The spoke face is flat black, and the aluminum body is cast with low-pressure methods.
Choose tires sized for a 16-inch rim that is 8 inches wide before mounting.
The 5 on 5 pattern with the 83 center bore is the fit to verify on the hub. The 0 offset and 4.5 backspacing put the wheel’s face near the centerline, and the inner clearance should be checked. Choose a tire sized for a 16-inch rim before installation, and confirm the load rating for the truck.
Key features
- Spoke design
- Flat black finish
- 5 on 5 bolt pattern
- Center bore 83
- Offset 0
Inspecting the wheel after use
A wheel can show damage before it fails, so a short inspection after each trail run is useful. Look at the bead seat for pitting, the spokes for cracks near the hub and the lip for bends that might affect how the tire seals. Keep a note of any new vibration or pull, since these can point to a wheel problem before it becomes serious.
Flat black finishes can show scratches more clearly in some light, so look at the face for scuffs and check the finish for chips. Repair small chips before corrosion spreads under the finish.
Balance the wheel and tire assembly if vibration shows up after a repair or a tire change. Recheck the lug torque on a new mounting, because seats can settle in the first few miles.
- Bead seats checked for pitting
- Spokes inspected for cracks
- Lug torque rechecked after mounting
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA7032-6873 |
| Diameter | 16 inches |
| Width | 8 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 83 |
| Offset | 0 |
| Backspacing | 4.5 |
| Style | Spoke |
| Finish | Flat black |
| Construction | Aluminum |
| Series | 32 Series Bandido |
Vehicle fitment
Pro Comp uses a universal fit label for this wheel. Confirm that the truck’s hub is 5 on 5 with an 83 center bore, and check the 0 offset for fender and brake clearance.
Pick tires suited to a 16-inch rim that is 8 inches wide. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One wheel. Look over the box contents before any installation work starts.












