Overview
The Pro Comp 34 Series Rockwell wheel, part number PXA9634-78536, is a 17-inch aluminum spoke wheel with an 8.5-inch width. It has a 6 on 135 bolt pattern and a matte bronze finish, and it measures 17×8.5.
The wheel is built for performance trucks and sport utility vehicles and uses low-pressure cast aluminum alloy. It has an 87.1 center bore, a 0 offset and a 4.75 backspacing. It is universal fit and is not matched to a make, model or year.
Key features
- Low-pressure cast aluminum
- 17-inch diameter with an 8.5-inch width
- 6 on 135 bolt pattern
- Center bore 87.1
- Offset 0 and backspacing 4.75
- Matte bronze spoke finish
Choosing the right setup
A spoke wheel has to carry the tire load while matching the hub exactly. On a six-lug hub, the bolt holes set lug alignment and the center bore sets how the wheel centers on the hub, so both need checking before the tire goes on. Wheel width and offset then decide how the tire sits in the fender and how close the rim comes to the brake caliper. A wheel that clears the caliper on paper can still rub once a larger tire is fitted, so test the steering lock with the tire mounted.
Sizing a replacement is easier when the original wheel’s measurements are at hand. Note the diameter, width, bolt pattern and center bore, then compare each one. The seat type of the lug nuts also matters, because a mismatched seat can loosen under load even when the bolt pattern is correct.
- Measure the hub bore before buying
- Compare offset with the old wheel
- Check the lug seat type on your nuts
- Test steering lock with the tire fitted
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA9634-78536 |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 6 on 135 |
| Center bore | 87.1 |
| Offset | 0 |
| Backspacing | 4.75 |
| Style | Spoke |
| Finish | Matte bronze |
| Construction | Aluminum |
Vehicle fitment
It is universal fit and is not matched to a make, model or year. Confirm the 6 on 135 bolt pattern and 87.1 center bore against your hub before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Six-lug 135 hubs need a wheel whose bolt holes and center bore both match, so measure the hub before purchase rather than relying on the diameter alone.
Matte bronze is the finish for this six-lug 135 wheel, and the spoke design is cast from aluminum. Its 87.1 center bore is the key measurement for hub fit, and the 0 offset and 4.75 backspacing set how the wheel sits relative to the brakes.
What’s included
This item is one 17×8.5 matte bronze wheel. Caps and lugs are not supplied.













