Overview
The Pro Comp 76 Series Patriot in part number PXA8176-2982 is a 20×9 alloy wheel with an 8×6.5 bolt pattern, a 5 inch back spacing and a 0 mm offset. It has a gloss black milled finish and a listed maximum load of 3650 lb.
No vehicle is named for this wheel, so check the bolt pattern, offset and hub bore against your vehicle before ordering.
Brake clearance and tire size
Caliper clearance depends on spoke design as well as offset. Measure the space inside the spokes against the caliper and rotor before fitting. A 0 mm offset places the mounting face near the wheel’s center line, which changes how the wheel clears the caliper compared with a higher offset. Recheck clearance after any suspension lift, since a lift shifts the wheel’s position under the fender.
Milled faces on a gloss black finish show machining marks and need care during mounting. Use a torque pattern and check the seat at each lug. Once the wheels are installed, re-check the lug torque after a few drives, and keep the wheel bearing and hub face clean so the wheel sits true. Keep spare lug nuts in the vehicle for trail repairs.
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA8176-2982 |
| Series | 76 Series Patriot |
| Diameter | 20 in |
| Width | 9 in |
| Bolt pattern | 8×6.5 in |
| Back spacing | 5 in |
| Offset | 0 mm |
| Max load | 3650 lb |
| Finish | Gloss black milled |
Vehicle fitment
Confirm the 8×6.5 pattern and hub bore against your vehicle before buying.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The wheel only.









