Overview
The Pro Comp 40 Series Vertigo 18×9 wheel, part number PXA5140-898350, is an 18-inch aluminum split spoke wheel with a 9-inch width. The bolt pattern is 6 on 5.5 and the finish is satin black with a milled look, part of the 40 Series Vertigo satin black and milled range.
Pro Comp builds the wheel with low-pressure casting. Its 83 center bore, 0 offset and 5 backspacing are the figures that define how it sits on the hub. The brand classes it as universal fit, and no particular vehicle is named.
Key features
- Low-pressure cast aluminum
- 18-inch diameter, 9-inch width
- 6 on 5.5 bolt pattern
- Center bore 83
- Offset 0 with backspacing 5
- Satin black with milled spoke detail
Keeping the finish
Satin black finishes hide light marks well, but they can dull or streak when cleaned with harsh products. Wash the wheel with mild soap, plenty of water and a soft brush or microfiber cloth. Dry it fully before applying any protectant, and avoid products that leave a glossy film on a satin surface.
Milled detail on a spoke face collects brake dust and road grime in the recessed areas. Use a soft detail brush to clean those sections, and avoid wire brushes that scratch the aluminum. Check the wheel for curb damage, cracks or bent spokes after any hard impact, since small surface damage can grow over time.
- Clean after wet or salty drives
- Avoid acid-based wheel cleaners
- Inspect the spoke face at each tire change
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5140-898350 |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 83 |
| Offset | 0 |
| Backspacing | 5 |
| Style | Split spoke |
| Finish | Satin black and milled |
| Construction | Aluminum |
| Series | 40 Series Vertigo |
Vehicle fitment
The wheel is not matched to any make, model or year. The 6 on 5.5 pattern and 83 center bore are the hub measurements to confirm, and the 18-inch size should be checked against brake and tire clearance.
Confirm your vehicle’s year, model and trim before ordering.
The satin black milled finish belongs to the 40 Series Vertigo range, and this version pairs a 6 on 5.5 pattern with an 83 center bore. Compare the hub diameter with the center bore before ordering, since the 0 offset and 5 backspacing keep the face centered.
What’s included
The package is one 18×9 wheel with a satin black, milled finish. Before starting, check whether center caps and lug nuts are needed for your installation.











