Overview
The Pro Comp PXA7069-6865 is a 16×8 flat black aluminum wheel from the Pro Comp 69 Series Vintage line, with a Holes style face and a 5 on 4.5 bolt pattern. It is sold as one wheel with a center bore of 83 and an offset of -12.
The alloy is low-pressure cast for a light, durable build with a flat black finish. This 8-inch-wide wheel has a 4 backspacing, and its high offset design gives brake clearance on trucks and SUVs.
Key features
- Low-pressure cast aluminum construction
- Holes style face
- 16-inch diameter, 8-inch width
- 5 on 4.5 bolt pattern
- Center bore of 83
- Offset -12 with 4 backspacing
Flat black finish care
Flat black finishes hide light scratches but show oil and tire dressing more easily. Use a mild cleaner and a soft brush, and avoid strong degreasers that can leave a patchy look. Rinse well after trail mud, since dried silt is harder to remove from a matte surface.
The finish does not change fit, so focus on the hub and caliper checks when buying. Flat black wheels are often paired with black lug nuts for a consistent look, though the nut seat must still match the wheel. Inspect the finish for chips after rock strikes, because bare aluminum can start to corrode at chips.
- Use mild cleaner and a soft brush
- Avoid tire dressing that drips onto the face
- Touch up chips before corrosion starts
- Match lug nut seat to the wheel
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA7069-6865 |
| Series | 69 Series Vintage (Classic) |
| Style | Holes |
| Construction | Aluminum |
| Finish | Flat black |
| Diameter | 16 inches |
| Width | 8 inches |
| Bolt pattern | 5 on 4.5 |
| Center bore | 83 |
| Offset | -12 |
| Backspacing | 4 |
Vehicle fitment
Fit depends on hub measurements, not a named model. The 5 on 4.5 pattern and 83 center bore come first, then the -12 offset against the caliper and fender.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A five-lug hub measuring 4.5 is required for this wheel. Test-fit with the tire mounted to confirm the rim clears the brake caliper and any steering parts. The 5 on 4.5 spacing and 83 center bore are the two figures that decide whether this wheel mounts, so measure the hub before ordering. The 8-inch width and -12 offset place the tire outward by a modest amount, and the 4-inch backspacing sets the inner lip position behind the mounting face. Test-fit with the tire and brake caliper in place, and check fender clearance at full steering lock. Pick a tire width suited to an 8-inch rim, since a mismatch affects both sidewall shape and clearance. The flat black finish does not change the fit checks.
What’s included
One 16×8 aluminum wheel. Bring lug nuts and a center cap that fit this five-lug hub if your vehicle needs them.











