Overview
The Pro Comp PXA5162-218247 is a 20×10 aluminum split-spoke wheel from the Pro Comp 62 Series Apex line, in satin black milled with an 8 on 6.5 bolt pattern. It is one wheel, with a center bore of 125 and an offset of -18.
Pro Comp built the Apex with low-pressure casting and rates its alloy wheels from 2500 to 3650 lbs per wheel. The 10-inch width, -18 offset and 4.75 backspacing set how the tire sits relative to the fender, so check these figures against the vehicle before ordering.
Key features
- Low-pressure cast aluminum
- Split-spoke face style
- 20-inch diameter and 10-inch width
- 8 on 6.5 bolt pattern
- Center bore of 125
- Offset -18 with 4.75 backspacing
Choosing wheel offset
Wheel offset is the distance from the mounting face to the rim centerline, and it decides how far the tire sits inside or outside the fender. A negative offset such as -18 moves the tire outward, which can improve stance but leaves less room for the brake caliper and tie rod. Anyone running a lifted setup or a wider tire should check inner clearance with the actual tire mounted, not with the wheel alone.
Backspacing works with offset to show how deep the wheel sits behind the mounting surface. A rim with more backspacing usually clears inner suspension parts better, while less backspacing can bring the tire closer to the frame. Keep the lug nuts matched to the seat style of the wheel so every nut seats fully against the rim.
- Measure inner clearance with the tire mounted
- Compare backspacing with your current wheels
- Recheck clearance after tire or lift changes
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5162-218247 |
| Series | 62 Series Apex |
| Style | Split spoke |
| Construction | Aluminum |
| Finish | Satin black milled |
| Diameter | 20 inches |
| Width | 10 inches |
| Bolt pattern | 8 on 6.5 |
| Center bore | 125 |
| Offset | -18 |
| Backspacing | 4.75 |
| Load rating | 2500 to 3650 lbs per wheel (Pro Comp alloy range) |
Vehicle fitment
No vehicle is named for this wheel. Universal fit on the specifications does not tie the wheel to a model. An 8 on 6.5 hub with a 125 center bore is the first match, and the -18 offset needs a clearance check.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the 8 on 6.5 layout on the hub before buying, because a 170 or 180 pattern will not mount. A test fit with the tire helps confirm that the 10-inch rim clears the caliper at full steering lock. Measure across the bolt holes so the 8 on 6.5 layout matches the hub exactly.
What’s included
One 20×10 aluminum wheel with a satin black milled finish.











