Overview
The Pro Comp 43 Series Sledge 20×9 wheel, part number PXA5143-2985, is a 20-inch aluminum spoke wheel that is 9 inches wide. It has a 5 on 5.5 bolt pattern and a satin black finish with milled detail, named in the series as 43 Series Sledge satin black and milled.
The wheel carries a 125 center bore, a 0 offset and a backspacing of 5. Its low-pressure cast build carries a 2500 to 3650 lbs per wheel rating. It is universal fit, not tied to a particular vehicle.
Key features
- Low-pressure cast aluminum
- 20-inch diameter and 9-inch width
- 5 on 5.5 bolt pattern
- Center bore 125
- Offset 0 and backspacing 5
- Satin black spoke wheel with milled detail
Trail use and wheel care
Spoke wheels take impacts from rocks and ledges on the trail, and the damage often starts at the spoke bases and the lip. After a hard run, look for cracks, bends or hairline marks near the spokes, and check for air loss at the bead, which can indicate a damaged seal.
Keep the mounting surfaces clean whenever the wheel comes off, and check tire pressure before each trip since low pressure raises the risk of a pinch or bead problem. Any bent or cracked wheel should be inspected by a shop before it is used again.
- Inspect spoke bases and lip after trail use
- Clean mounting surfaces when the wheel is off
- Check tire pressure before each trip
- Inspect the valve stem for leaks
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5143-2985 |
| Wheel diameter | 20 inches |
| Wheel width | 9 inches |
| Bolt pattern | 5 on 5.5 |
| Center bore | 125 |
| Offset | 0 |
| Backspacing | 5 |
| Load rating | 2500 to 3650 lbs per wheel. |
| Style | Spoke |
| Finish | Satin black, milled |
| Construction | Aluminum |
| Series | 43 Series Sledge |
Vehicle fitment
This 20×9 wheel has no vehicle list and is universal fit. The 5 on 5.5 pattern and 125 center bore must match the hub, and the 20-inch size should clear the brake calipers.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the hub layout first, since a 5 on 5.5 pattern is different from a 5 on 5 pattern. Check caliper and fender clearance once the wheel is mounted.
A five-lug 5 on 5.5 hub needs a 125 center bore that seats the wheel, and the 0 offset places the mounting face centered. Measure the hub diameter and the caliper gap before mounting the 20-inch wheel, since it leaves less space than smaller sizes.
The 9-inch width and satin black milled finish complete the listed specification.
What’s included
The package holds one 20×9 wheel in satin black with milled detail. Confirm center caps and lug nuts are included before mounting.











