Overview
The Pro Comp 73 Series Trilogy wheel, part number 5173-21073, is a 20 by 10 inch aluminum spoke wheel with a 5 on 5 bolt pattern and a satin black finish. It has a -18 offset and is a sport utility wheel with high offset brake clearance.
The Xtreme alloy design uses counter pressure casting technology, which keeps the wheel light while allowing a black, black powder coat chrome or polished finish. The alloys are low-pressure cast. The wheels include center caps.
Key features
- 20 in. diameter and 10 in. width
- Aluminum construction with a spoke style
- 5 on 5 bolt pattern with a 72 center bore
- Satin black finish in the 73 Series Trilogy style
- Offset -18 and backspacing 4.75
- High offset brake clearance
- Center caps included
Matching the wheel to your hub
A wheel has to match the hub in several ways at once. The bolt pattern must line up with the studs, and the center bore should fit the hub so the load is carried correctly. Offset and backspacing decide where the wheel sits relative to the brakes and fenders. Checking all of these measurements against the vehicle prevents vibration, rubbing and wheel stud damage.
Aluminum wheels are often selected for a lighter weight than steel, but the same fit checks apply. Hub rings can be used when the center bore is larger than the hub, and they should be sized and seated correctly. Lug nuts also need to match the seat style of the wheel. Once the wheel is mounted, recheck lug torque after the first drive and inspect the tire for uneven wear.
- Confirm hub bore against the wheel center bore
- Check lug nut seat type before buying nuts
- Verify tire clearance at full steering lock
- Balance the tire and wheel assembly after mounting
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | 5173-21073 |
| Series | 73 Series Trilogy |
| Diameter | 20 in. |
| Width | 10 in. |
| Bolt pattern | 5 on 5 |
| Center bore | 72 |
| Offset | -18 |
| Backspacing | 4.75 |
| Style | Spoke |
| Construction | Aluminum |
| Finish | Satin black |
| Fitment type | Universal fit (per Pro Comp) |
Vehicle fitment
The wheel is universal fit and no specific vehicles are named. The 5 on 5 bolt pattern, 72 center bore and -18 offset must match the hub and brake clearance of the vehicle before fitting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The offset and backspacing change how far the wheel sits in the wheel well, so check tire clearance against the suspension and fenders after mounting. The 72 center bore has to match the hub for the wheel to center correctly. Confirm whether hub rings are needed for your hub before mounting.
Offset is the distance from the wheel’s mounting face to its centerline. A -18 offset places the mounting face outboard of the centerline, so the wheel sits further out than a positive-offset wheel of the same width would. The 4.75 backspacing describes how far the back of the wheel sits behind the mounting face.
What’s included
Center caps are included. Lug nuts and tires must be sourced separately before mounting.











