Overview
The Pro Comp PXA5172-21055 is a 20×10 aluminum spoke wheel from the Pro Comp 72 Series Axis line, in satin black milled with a 5 on 150 bolt pattern. It is sold as one wheel with a center bore of 110 and an offset of -18.
This 10-inch-wide rim has a backspacing of 4.75 and a 20-inch diameter, so the tire choice matters for both clearance and sidewall height.
Key features
- Low-pressure cast aluminum construction
- Spoke face style
- 20-inch diameter, 10-inch width
- 5 on 150 bolt pattern
- Center bore of 110
- Offset -18 with 4.75 backspacing
Fitting a 20-inch wheel
A 20-inch wheel changes the tire you run, since a larger diameter leaves less sidewall for cushioning. Tires for this size tend to ride firmer and cost more than smaller sizes, and off-road tread choices are narrower. Pick the tire first, then confirm the rim width and tire load rating suit the vehicle’s weight and how it is used.
With a -18 offset and a 10-inch width, the tire sits farther outboard than a standard fitment, so suspension travel and steering lock should be checked with the tire mounted. Wider rims also put more leverage on the wheel bearings and ball joints, so inspect those parts when fitting a larger setup. Mount the tire on the rim and check that the bead seats evenly before inflating.
- Check tire load rating against vehicle weight
- Verify steering lock with the tire mounted
- Inspect ball joints after the first few drives
- Confirm bead seating before inflating
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5172-21055 |
| Series | 72 Series Axis |
| Style | Spoke |
| Construction | Aluminum |
| Finish | Satin black milled |
| Diameter | 20 inches |
| Width | 10 inches |
| Bolt pattern | 5 on 150 |
| Center bore | 110 |
| Offset | -18 |
| Backspacing | 4.75 |
Vehicle fitment
This is a universal fit design, so no specific vehicle is identified. A 5 on 150 hub with a 110 center bore is the first match to check, and the -18 offset needs fender and brake caliper clearance checked. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use only a five-lug hub at 150 with a matching 110 center bore. Test-fit the 10-inch rim with the chosen tire, since the -18 offset changes the tire position relative to the brake parts. A 5 on 150 spacing is a specific layout, so confirm it against the vehicle’s hub before buying; the lug holes must line up exactly. The 110 center bore must seat on the hub pilot. The 10-inch width and -18 offset move the tire outboard, so test-fit with the tire and check the inner fender and caliper clearance. The 4.75 backspacing sets how much room the inner lip has behind the mounting face. Because this is a 20-inch rim, pick a tire sized for both the 20-inch diameter and the 10-inch width, then confirm it fits between the fenders. The 110 center bore should be checked against the hub pilot before the wheel goes on, and the -18 offset should be measured against brake clearance with the tire mounted.
What’s included
One 20×10 aluminum wheel in satin black milled. The contents are one wheel, so lug nuts and a center cap must be sourced separately.











