Overview
The Pro Comp EXPK4176T, also written K4176T, is a 6-inch Stage II suspension lift kit for the 2011–2016 Ford F-250 Super Duty. It adds replacement radius arms and PRO-X shocks, and the kit fits those trucks directly.
The kit uses a block and spacer rear lift with a U-bolt, and the Stage II system includes new radius arms in place of the factory pieces. The brand’s description says these systems keep steering and suspension geometry in line through a laser-cut bracket set and a drop pitman arm.
Key features
- Laser-cut brackets and a drop pitman arm, which Pro Comp says keep the suspension and steering geometry in line
- Specific-rate coil springs for added ride height
- Stage II replacement radius arms of 4130 chromoly tubing, with 3/16-inch steel plate
- PRO-X front and rear shocks, included
- Direct fit to the listed 2011–2016 F-250 Super Duty
Radius arm geometry
Radius arms locate the axle and control how it moves under braking and acceleration. When they are replaced, the arm angle and bushing load change, which is why the arms and their mounts deserve careful inspection. Suspension parts often wear together, so checking shocks and coil springs at the same time is a practical choice.
Chromoly tubing is strong for its weight, and steel plate reinforcements help the mounts hold up under repeated loads. Even so, welds, bushings and bolts should be checked for cracks or movement after off-road use.
A drop pitman arm changes steering geometry, so the steering feel and tie rod ends should be checked after the install. Alignment is the final step, and it works best once the truck has settled at its full height.
- Inspect radius arm bushings after rough trails
- Check welds and mounts for cracks
- Recheck the drop pitman arm geometry after alignment
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPK4176T (K4176T) |
| Kit type | Lift kit, complete suspension system |
| Kit stage | Stage 2 |
| Lift height | 6 inches, with a lift height range of 6–7 inches |
| Radius arms | Replacement, 4130 chromoly tubing with 3/16-inch steel plate |
| Rear lift method | Block and spacer |
| Rear lift component | Block and U-bolt with add-a-leafs |
| Front shocks | PRO-X |
| Rear shocks | PRO-X |
| Shocks included | Yes |
| Fitment type | Direct fit |
Vehicle fitment
The kit fits the 2011–2016 Ford F-250 Super Duty in the King Ranch, Lariat, Platinum, XL and XLT trims.
The F-350 Super Duty and the 2017 and newer F-250 are not covered by this part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The Stage II radius arms replace factory parts, so this is a bolt-in job only if the listed brackets fit your truck. Plan for a full alignment and a recheck of the drop pitman arm geometry after the lift.
What’s included
The kit includes replacement radius arms, coil springs, the drop pitman arm, the block and U-bolt rear set, and PRO-X shocks. Check the package contents against your installation before starting work.













